Hi,
Under heavy load, my CPU only utilize 50%.
I have high performance enabled (100% to everything under processor power management).
Clean fan and heat sink. No overheating.
I used HeavyLoad (https://www.jam-software.de/customers/downloadTrial.php?article_no=402) to check the cpu. This app showed 100% CPU utilization but Task Manager shows only 50%.
I have updated BIOS. In biose multicore and HT enabled. (No boost option).
I tried replacing the RAM.
I tried prime 95 also I use MATLAB. the CPU never goes over 50% of its base speed.
Thank you.
Here is my PC info
Version 10.0.16299 Build 16299
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name DESKTOP-***************
System Manufacturer Hewlett-Packard
System Model HP ProBook 4440s
System Type x64-based PC
System SKU ***************
Processor Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date Hewlett-Packard 68IRR Ver. F.64, 14-Jul-17
SMBIOS Version 2.7
Embedded Controller Version 88.33
BIOS Mode UEFI
BaseBoard Manufacturer Hewlett-Packard
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Mobile
Secure Boot State Off
PCR7 Configuration Binding Not Possible
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "10.0.16299.15"
User Name DESKTOP-********
Time Zone ****************
Installed Physical Memory (RAM) 8.00 GB
Total Physical Memory 7.88 GB
Available Physical Memory 3.23 GB
Total Virtual Memory 9.84 GB
Available Virtual Memory 5.14 GB
Page File Space 1.95 GB
Page File C:\pagefile.sys
Under heavy load, my CPU only utilize 50%.
I have high performance enabled (100% to everything under processor power management).
Clean fan and heat sink. No overheating.
I used HeavyLoad (https://www.jam-software.de/customers/downloadTrial.php?article_no=402) to check the cpu. This app showed 100% CPU utilization but Task Manager shows only 50%.
I have updated BIOS. In biose multicore and HT enabled. (No boost option).
I tried replacing the RAM.
I tried prime 95 also I use MATLAB. the CPU never goes over 50% of its base speed.
Thank you.
Here is my PC info
Version 10.0.16299 Build 16299
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name DESKTOP-***************
System Manufacturer Hewlett-Packard
System Model HP ProBook 4440s
System Type x64-based PC
System SKU ***************
Processor Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date Hewlett-Packard 68IRR Ver. F.64, 14-Jul-17
SMBIOS Version 2.7
Embedded Controller Version 88.33
BIOS Mode UEFI
BaseBoard Manufacturer Hewlett-Packard
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Mobile
Secure Boot State Off
PCR7 Configuration Binding Not Possible
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "10.0.16299.15"
User Name DESKTOP-********
Time Zone ****************
Installed Physical Memory (RAM) 8.00 GB
Total Physical Memory 7.88 GB
Available Physical Memory 3.23 GB
Total Virtual Memory 9.84 GB
Available Virtual Memory 5.14 GB
Page File Space 1.95 GB
Page File C:\pagefile.sys