Unknown power cable!

[Jack Hammered]

I have a Zalman Fan Controller (ZM-MFC1-Plus) I have had for around six years, it never came with a power cable and as I bought it off e-Bay I haven't been able to get one from the buyer or Zalman. I have never known what kind of power cable it is to purchase a replacement, I would really want to find out so I can FINALLY use the fan controller!

Here is a really close picture which includes the power connection to the fan controller:
http://content.hwigroup.net/images/products/xl/013762/3/zalman_zmmfc1_plus_black.jpg

Some more pictures showing the molex to the unknown power cable:
http://zalman-eu.com/IMG/jpg/zm-mfc1_plus_03_b_0_.jpg
http://i031.radikal.ru/1205/35/d3aacd50b5ec.jpg

 

[David Major]

Google is your friend! I googled your problem and found the following:

Startech 12 inch TX3 Fan Power Splitter Cable

http://www.amazon.co.uk/Startech-inch-Power-Splitter-Cable/dp/B002DY7M1G/ref=pd_bxgy_computers_img_y

 

[thenewnumber2]

It's just a standard 4- pin floppy disk power connector, also known as a Molex mini-spox. Your PSU probably has one. If not, you can get an adaptor that will convert one of your existing connectors to the correct one.

That Startech cable is only a splitter to convert one fan port into two: it's not what you need.

 

[ko888]

You should be able to modify the Berg connector (i.e. floppy diskette drive power connector) to fit into the connector on the controller. Looks like the ridge on one side of the Berg connector will need to be shaved off.

http://www.ebay.com/itm/2pcs-4Pin-IDE-ATA-Power-Supply-Molex-to-Floppy-Drives-Adapter-Cable-Computer-PC-/190737531875

 

[Chicano]

If the Fan controller includes the IDE connector, just connect a IDE/Molex female PSU connector to the white IDE/Molex male connector. And connect your fan power connectors to either of the six Fan connectors on the Controller.
If your PSU only has connectors for SATA devices, one of these (SATA to IDE) adapters should help.