unlocking L7 bridges

[JOJO]

if i connect all the L7 bridges, i know that will put me up to 1.85 volts. But with them all connected, can i turn down the voltage using the jumpers on the moboard lets say to 1.775, or 1.8 (even though all the bridges are connected)? (a7v btw)

Basically, i want to be able to adjust the voltage without having to take the hsf off all the time and redraw the connections on the bridge
thnkx

 

[LTJLover]

you shouldn't have to touch those bridges. The A7V lets you do it with jumpers. I helped my friend install his Duron in the KT7 RAID and all we did was close the L1 bridges. It is running higher core voltage which we set in the soft bios.

Jon
"Water-Cooled CPU Runner"

 

[JOJO]

thnx jon , u were right

which leads me to my next post.....