[SOLVED] Unplugged everything and took ram out, put it all back in and no display on monitor, but everything else seems to work fine.

[Jairow ayyy]

So basically my friend needed my ram stick to update his bios, it didnt end up working anyway. Anyways I plugged my computer back in and everything and put my ram back in and monitor says no display. I have troubleshooted as much as possible. I know it's not my GPU because it says no display when I plug it into the mobo as well. I have tried many options and nothing works. Specs (from what I remember because I cant check because I cant look):
Intel i5-6400
Pny geforce gtx 1060 6gb
Evo potenza 16gb (I think it is 2133mhz)
Mobo: Asus z170-p
Psu: Rosewill 550w I believe
If you need any more info just ask. All answers are appreciated.

 

[NightHawkRMX]

https://www.intel.com/content/www/us/en/support/articles/000025368/processors.html

Some motherboards are picky and will require a CMOS clear any time ram is changed.

 

[Jairow ayyy]

https://www.intel.com/content/www/us/en/support/articles/000025368/processors.html

Some motherboards are picky and will require a CMOS clear any time ram is changed.

Yes but the ram was not changed it is the same ram sticks? Even if they are the same ram sticks they will still need a cmos clear? Also isn't that a factory reset so will it delete everything?

 

[NightHawkRMX]

I have seen very picky motherboards. My motherboard won't boot without CMOS clear even If I just remove 1 of my 2 ram sticks and try to boot. Its worth a try.

All clearing CMOS does is reset BIOS settings to factory. It does not delete any files or affect your drives in any way.

 

[JamaalAhmed]

Plug in the video cable into your graphics card slot