So I've searched in old threads about my problem but mine has additional info that might be useful.
So, first the reason I am breadboarding was a progressive issue. During any task while the PC was on I would get random black screens displaying "no signal " with sound looping. The fans and everything else kept spinning, the PC wouldn't shut down. Restarting would not solve the issue, requiring a shut down for some time and turning on again and it would boot just fine.
Then, a second problem, some days the PC would refuse to turn on if it was off for a long time. Power button not jump start would work, until I've waited for about 30 minutes of the PSU plugged it would start normally after pressing power.
Then, lastly, yesterday the PC would turn on but no boot. Instead showing "no signal" on monitor. From there I went for the breadboard for TS.
With only the Mobo, CPU and PSU, the speaker remains silent, no beeps, but the Mobo and processor fan starts.
If I add a single stick of 8gb ram, I get a single long beep and 2 short beeps after. Same results for every slot, and same results after using the second 8gb RAM stick that I have.
After my research the first suspect is the PSU, followed by the Mobo and lastly the CPU, can I narrow it down with the data i have?
Specs:
Mobo: gigabyte b450 gaming X ATX
CPU: AMD Ryzen 5 1600 AF
PSU: Corsair ATX PSU 80 plus VS650 650 W
GPU: XFX AMD Radeon RX580
RAM : 2x 8gb Corsair vengeance LPX 2400 MHz DDR4
I checked the CPU after all tests and no bent pins or anything off was spotted.
Thanks.
So, first the reason I am breadboarding was a progressive issue. During any task while the PC was on I would get random black screens displaying "no signal " with sound looping. The fans and everything else kept spinning, the PC wouldn't shut down. Restarting would not solve the issue, requiring a shut down for some time and turning on again and it would boot just fine.
Then, a second problem, some days the PC would refuse to turn on if it was off for a long time. Power button not jump start would work, until I've waited for about 30 minutes of the PSU plugged it would start normally after pressing power.
Then, lastly, yesterday the PC would turn on but no boot. Instead showing "no signal" on monitor. From there I went for the breadboard for TS.
With only the Mobo, CPU and PSU, the speaker remains silent, no beeps, but the Mobo and processor fan starts.
If I add a single stick of 8gb ram, I get a single long beep and 2 short beeps after. Same results for every slot, and same results after using the second 8gb RAM stick that I have.
After my research the first suspect is the PSU, followed by the Mobo and lastly the CPU, can I narrow it down with the data i have?
Specs:
Mobo: gigabyte b450 gaming X ATX
CPU: AMD Ryzen 5 1600 AF
PSU: Corsair ATX PSU 80 plus VS650 650 W
GPU: XFX AMD Radeon RX580
RAM : 2x 8gb Corsair vengeance LPX 2400 MHz DDR4
I checked the CPU after all tests and no bent pins or anything off was spotted.
Thanks.