Upgrade Help for Kingston Hyperx fury

[shaggy s]

Want to upgrade with kingston hyperx fury.

Motherboard : Gigabyte GA-H61M-D2H.
Processor : Intel G2020.

Max frequency supported by motherboard and processor is 1333mhz.

My question is about that can i run 1600mhz hyperx fury stick in 1333mhz mode ?

 

[Darkbreeze]

You should be ok, but sometimes older systems are finicky about chip density and voltage requirements. It might be best to check with Kingston on compatibility or stick with module part numbers listed on the Qualified vendors list on the motherboard product page.

The QVL does show MANY models that support downclocking from higher clocked stock speeds however so in most cases you're probably fine and Kingston generally has good compatibility with the LGA 1155 memory controllers.

 

[Tradesman1]

Should be OK, make sure you have the latest BIOS, the Fury run off of PnP and many of the H61 mobos weren't real quick with BIOS updates