I am upgrading my processor for gaming. I have the g4400 and want to upgrade and i have ab asus motherboard with ddr4 x2, ati radeon rx470 videao card and am not sure what type of cpu to get. 1151 pin set.
Thanks for the advice on the k series. I am looking at a 6600 and a 4460 and they appear to operate almost the same, any real difference?
Jacob_146 :
Brandon_Shaw :
Thanks for the advice on the k series. I am looking at a 6600 and a 4460 and they appear to operate almost the same, any real difference?
6600 is way newer
the i5 4460 is a 4th generation chip and will require DDR3 and a new motherboard, it is not pop-in your existing motherboard ready so to speak.
the 6600 will just pop into your existing motherboard and go
but dont get a i5 ending in a k because you can overclock in those and they cost more only get one if you want to over clock. Also get one that comes with a cpu cooler if you dont have a compatible one already.
How would the transition to Kaby Lake be difficult?
BIOS support is sketchy on some boards. you need a skylake chip to flash to the proper firmware version if available. your g4400 is skylake so that is not an issue.
I found a i5-6600 and a i5-6600k, Is the difference the power consumption?
the 6600 has a fixed clock and cannot easily be overclocked.
the 6600k like all k series chips are unlocked and easily overclock-able with the right motherboard.
How would the transition to Kaby Lake be difficult?
also upgrading your bios can be kinda risky because if you lose power or something like that you can break your mobo, so its just better to stay in skylake because there is not that much of a performance difference in games.
Thanks for the advice on the k series. I am looking at a 6600 and a 4460 and they appear to operate almost the same, any real difference?
Jacob_146 :
Brandon_Shaw :
Thanks for the advice on the k series. I am looking at a 6600 and a 4460 and they appear to operate almost the same, any real difference?
6600 is way newer
the i5 4460 is a 4th generation chip and will require DDR3 and a new motherboard, it is not pop-in your existing motherboard ready so to speak.
the 6600 will just pop into your existing motherboard and go