Question Upgraded from a 1060 to 2060 no display and no USB.

Dec 20, 2019
2
0
10
So I installed a 2060 that I had as an early xmas present, I turned off the power unplugged it then held the power button for 5 seconds, plugged it in with the 8 pin power connector and it all powers on and the fans spin at 100% but there is no display on either of my monitors, one is display port one is hdmi. I have removed cmos and put it back in and spent 3 hours rebuilding my PC to find it still doesn't work and I have tried with 1 ram stick. I have a 9400f, 16gb ram and a 650w psu.