Upgrading RAM in HP Compaq 6000 Pro

[Jimbo832]

I am going to be upgrading a office pc my dad uses, it currently has 2gb RAM in it 2x1gb sticks and i am looking to replace those with 2x2gb sticks, I don't wanna add any more cause its a 32 bit OS anyway. So the problem I have come across is this, on the website ( http://goo.gl/DVLWly ) they state that you can add "PC3-10600 DDR3 non-ECC SDRAM (runs at 1333 MHz)" so i went and looked on pc part picker for DDR3 RAM 2x2gb sticks running at 1333mhz, i found some nice ones and then i saw they of course were all 240 pin whereas on the hp website it stated "Two 200-pin SODIMM slots supporting dual channel memory" do they even sell 200 pin DDR3? if so link me please!

 

[captaincharisma]

for old hardware like that the best thing to do is go find some on ebay. you may even be able to find some ram on there when entering the computer make and model too

 

[Deuce65]

It's probably listed under laptop memory, if you are looking at a place like newegg.
With that said, 200 pin ddr3 memory doesn't exist. 200 pin is ddr2, ddr3 is 204 pin. While it is almost certainly ddr3 memory, I would suggest looking at the actual memory stick you already have installed and read it's specs, specifically the part that will say something like PC3, pc2, etc. Or just post the exact model number here and we can tell you what it is.