[URGENT] How Do I Connect My Motherboard To My Case [URGENT]

[Clarkeboy]

[URGENT PLEASE HELP] [URGENT PLEASE HELP] [URGENT PLEASE HE LP]

Hey guys! My motherboard needs to be screwed into my case but I have no idea what screws to use or how to do it? Video tutorials would be helpful

There's a hole in the MOBO which is aligned to a hole in the case!

Motherboard: Gigabyte GA-970A-UD3P ATX AM3+ Motherboard
Case: Corsair 200r

 

[USAFRet]

Is this all new parts? The screws are in a plastic bag in the case.

 

[spooky2th]

The case should have come with "standoffs" and other screws needed. Screw the standoffs into the holes that match up to the holes on your MB. Will need a screwdriver. See which screws fit the standoffs and use them to screw the board down on the standoffs. First pop the rear panel into place then fit the board into it correctly and screw it down on the standoffs. Might have to use a little pressure getting the board in place to screw it down.

 

[Clarkeboy]

The case should have come with "standoffs" and other screws needed. Screw the standoffs into the holes that match up to the holes on your MB. Will need a screwdriver. See which screws fit the standoffs and use them to screw the board down on the standoffs. First pop the rear panel into place then fit the board into it correctly and screw it down on the standoffs. Might have to use a little pressure getting the board in place to screw it down.

I understand, any video tutorials for aid?

 

[USAFRet]

The case should have come with "standoffs" and other screws needed. Screw the standoffs into the holes that match up to the holes on your MB. Will need a screwdriver. See which screws fit the standoffs and use them to screw the board down on the standoffs. First pop the rear panel into place then fit the board into it correctly and screw it down on the standoffs. Might have to use a little pressure getting the board in place to screw it down.

I understand, any video tutorials for aid?

From Newegg
Part 1: https://www.youtube.com/watch?v=VIF43-0mDk4
Part 2: https://www.youtube.com/watch?v=d_56kyib-Ls
Part 3: https://www.youtube.com/watch?v=RxaVBsXEiok

 

[apcgamer]

See the motherboard's manual for guidance on the placement of the standoffs.

 

[Clarkeboy]

See the motherboard's manual for guidance on the placement of the standoffs.

checked both mobo and case nothing

 

[apcgamer]

Try searching the web for the PDF version

 

[alexoiu]

https://www.youtube.com/watch?v=qzeWODR0OYM
Make sure that each standoff does match a board's screw hole (use 9 out out of the case's 10 holes).
Screws for motherboard look like http://pic01.uxsight.com/photo_new/20090828/c/ux_a09082800ux0235_ux_c.jpg

 

[Clarkeboy]

https://www.youtube.com/watch?v=qzeWODR0OYM
Make sure that each standoff does match a board's screw hole (use 9 out out of the case's 10 holes).
Screws for motherboard look like http://pic01.uxsight.com/photo_new/20090828/c/ux_a09082800ux0235_ux_c.jpg

Thank you so much Alex! I'm sorry I picked the other solution, this info is equally valued! Thanks mate!

 

[Clarkeboy]

https://www.youtube.com/watch?v=qzeWODR0OYM
Make sure that each standoff does match a board's screw hole (use 9 out out of the case's 10 holes).
Screws for motherboard look like http://pic01.uxsight.com/photo_new/20090828/c/ux_a09082800ux0235_ux_c.jpg

Thank you so much Alex! I'm sorry I picked the other solution, this info is equally valued! Thanks mate!

 

[Clarkeboy]

Thank you all!

 

[alexoiu]

https://www.youtube.com/watch?v=qzeWODR0OYM
Make sure that each standoff does match a board's screw hole (use 9 out out of the case's 10 holes).
Screws for motherboard look like http://pic01.uxsight.com/photo_new/20090828/c/ux_a09082800ux0235_ux_c.jpg

Thank you so much Alex! I'm sorry I picked the other solution, this info is equally valued! Thanks mate!

No problem, Good luck with the new setup!

 

[spooky2th]

Let us know how it goes especially if you run into any problems.....