Question URGENT!!! PC stuck in bootloop after mobo bios update

Mar 2, 2020
19
3
15
0
After a bios update to try and get 3rd gen support on my ecs h61 h2m2 mobo, my pc was working. I put in my graphics card, as I was using onboard graphics before, and nothing on my monitor or tv... I removed it aaannnddd bootloop... this is my first build and I’m devastated that I can’t get it working. I can get it as far so it says entering setup if I push the delete key enough but I can’t actually get into the bios. As I said I managed to reach windows before I put in my gtx 780 but now I’m at my wits end. I was so close. All I needed to do was that and then install my 3770. Please help with this. I cannot breadboard or anything like that, as I do not have the means necessary to do so and I don’t want to ruin anything else. Thanks in advance.
 
Mar 2, 2020
19
3
15
0
Try clearing the CMOS via jumper or button, See your manual to see which options you have.
don't forget to put the jumper back if thats what you have.
Thanks. I thought that could do it but I didn’t want to rush into it. I’ll give it a go in a bit but I just woke up.
 
Mar 2, 2020
19
3
15
0
Try clearing the CMOS via jumper or button, See your manual to see which options you have.
don't forget to put the jumper back if thats what you have.
Tried that a few times now and no luck. I have to reset the cmos every time I turn it on. And it will bootloop won’t post at all with the graphics card in.
 

ASK THE COMMUNITY

TRENDING THREADS