Hello, I have a Tomahawk b450
2600 Ryzen, Corsair 650w PSU, a GPU Rx 550 4g.
I tried to clean my pc as I do always every 4-5 months.
I removed the CPU to clean everything, PINS ARE NOT BEND.
But I put too much thermal paste and got it to the pins. After that using 93° alcohol and a toothbrush I remove everything from it..
First time I got CPU red light on the right side of the mobo, after that vram. The most time the Boot light is on red.
What I have tried:
Reset bios by removing the battery CMOS and let 1 min off,
Flashing bios update with usb stick and pressing the flash button didnt work, tried to remove the rams and swap them etc etc nothing.
Monitor is working I tried it with a laptop .
Only black screen and black monitoR,
PLEASE , provide me info of fixing it. No bend pins, every cable is ok. I am going mad , I have no money to buy anything rn, everything was working at the morning.
2600 Ryzen, Corsair 650w PSU, a GPU Rx 550 4g.
I tried to clean my pc as I do always every 4-5 months.
I removed the CPU to clean everything, PINS ARE NOT BEND.
But I put too much thermal paste and got it to the pins. After that using 93° alcohol and a toothbrush I remove everything from it..
First time I got CPU red light on the right side of the mobo, after that vram. The most time the Boot light is on red.
What I have tried:
Reset bios by removing the battery CMOS and let 1 min off,
Flashing bios update with usb stick and pressing the flash button didnt work, tried to remove the rams and swap them etc etc nothing.
Monitor is working I tried it with a laptop .
Only black screen and black monitoR,
PLEASE , provide me info of fixing it. No bend pins, every cable is ok. I am going mad , I have no money to buy anything rn, everything was working at the morning.