J justin49088 Prominent Feb 26, 2017 149 0 690 Dec 12, 2017 #1 the usb 3.0 cable that is used at the front panel is stuck in my motherboard how do i pull it out. https://imgur.com/a/2yPzA
the usb 3.0 cable that is used at the front panel is stuck in my motherboard how do i pull it out. https://imgur.com/a/2yPzA
Solution C C Candan Dec 12, 2017 LOL. Promise you it's not locked. Just tight! It will come out. You can see the middle piece is to ensure it goes in the right way up and not upside down. Then to the left and the right is a small bump only to hold it in place. But it doesn't lock. Just needs a firm but steady pull!
LOL. Promise you it's not locked. Just tight! It will come out. You can see the middle piece is to ensure it goes in the right way up and not upside down. Then to the left and the right is a small bump only to hold it in place. But it doesn't lock. Just needs a firm but steady pull!
C Candan Honorable Jul 27, 2014 237 1 10,715 Dec 12, 2017 #2 It's only a pull. There's no locking tab for USB 3. Just give it a gentle wiggle side to side (not up and down) and it should come free Upvote 0 Downvote
It's only a pull. There's no locking tab for USB 3. Just give it a gentle wiggle side to side (not up and down) and it should come free
J justin49088 Prominent Feb 26, 2017 149 0 690 Dec 12, 2017 #3 Candan : It's only a pull. There's no locking tab for USB 3. Just give it a gentle wiggle side to side (not up and down) and it should come free doesent work there is locking tabs Upvote 0 Downvote
Candan : It's only a pull. There's no locking tab for USB 3. Just give it a gentle wiggle side to side (not up and down) and it should come free doesent work there is locking tabs
C Candan Honorable Jul 27, 2014 237 1 10,715 Dec 12, 2017 Solution #4 LOL. Promise you it's not locked. Just tight! It will come out. You can see the middle piece is to ensure it goes in the right way up and not upside down. Then to the left and the right is a small bump only to hold it in place. But it doesn't lock. Just needs a firm but steady pull! Upvote 0 Downvote Solution
LOL. Promise you it's not locked. Just tight! It will come out. You can see the middle piece is to ensure it goes in the right way up and not upside down. Then to the left and the right is a small bump only to hold it in place. But it doesn't lock. Just needs a firm but steady pull!