[SOLVED] USB HUB problem

[brannsiu]

I am using USB hub which is 1-to-4 and my nano receiver and portable drives are always connected through it but the problem is every time I unplug any of the data cable from the
hub it almost always affects the nano receiver (for my wireless keyboard and wireless mouse)
Windows will immediately notify me that my mouse or keyboard is unplugged but they are
actually not. Sometimes I don't even need to unplug anything, as long as I simply move the hub
a little bit some devices may be "unplugged". Is it common or is it because of the poor make of
the USB hub? But it is Amazonbasics I don't think this low tech thing will be this bad

 

[Lutfij]

Out of curiosity, how many USB ports does your PC have(if you remove the USB hub from the equation)? Make and model of your motherboard? Might want to see if the hub exhibits the same issue on a donor system or laptop. A link to the hub would also be of help to us.

 

[brannsiu]

Out of curiosity, how many USB ports does your PC have(if you remove the USB hub from the equation)? Make and model of your motherboard? Might want to see if the hub exhibits the same issue on a donor system or laptop. A link to the hub would also be of help to us.

Isn't it the quality issue of the USB hub alone?
it's like when I pull out one cable from the hub the "metal" inside the circuit of the hub is too sensitive or not well built and then it wrongly affects other ports on the hub, making it disconnected a little bit inside from the metal so virtually it isn't unplugged
but it is unplugged inside, isn't my guess close to the fact??

 

[scout_03]

you need something like this no unplug switch off and there are some with charger option https://www.newegg.com/wavlink-ws-u...5178880-_-powered usb hub-_-hub|power|usb-_-4