USB on the A7S333--Connect Where?

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

I have the typical hook up on the board of two USB ports on the panel that
contains the keyboard, monitor, etc. There's a small card (4"x2") on the
back that is plugged into USB_34 (maybe 56). My front panel has two USB
plugs on it. Two bundles emerge with four wires each: D+, D-, ground, and
VCC. Where do I hook these guys to on the board. My manual is not clear on
this. It's clear how to do this with a multi-lug (8pins?). I don't see that
any of these ports are USB2. Is that correct?
--
Wayne T. Watson (Watson Adventures, Prop., Nevada City, CA)
(121.015 Deg. W, 39.262 Deg. N) GMT-8 hr std. time)
Obz Site: 39° 15' 7" N, 121° 2' 32" W, 2700 feet

Most vehicle/deer accidents occur at sunset.
Vehicle deer whistles are ineffective.

Web Page: <home.earthlink.net/~mtnviews>

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

"W. Wat son" <wolf_tracks@invalid.inv> wrote in message
news:569Jd.4264$YD5.3709@newsread3.news.pas.earthlink.net...
>I have the typical hook up on the board of two USB ports on the panel that
>contains the keyboard, monitor, etc. There's a small card (4"x2") on the
>back that is plugged into USB_34 (maybe 56). My front panel has two USB
>plugs on it. Two bundles emerge with four wires each: D+, D-, ground, and
>VCC. Where do I hook these guys to on the board. My manual is not clear on
>this. It's clear how to do this with a multi-lug (8pins?). I don't see that
>any of these ports are USB2. Is that correct?

The A7S333 board does not have USB 2.0 ports so you would not
to add a separate PCI card for that. For the connections, you need
to connect each wire as folllows.

Pin 1 on Mbrd: VCC
Pin 2 on Mbrd: D-
Pin 3 on Mbrd: D+
Pin 4 on Mbrd: GND

Do the same thing for both rows of pins.


---
Kevin Chalker, Owner KC COMPUTERS
E-mail: kc@kc-computers.com Web: www.kc-computers.com
Internet dealer since 1991!!! See WWW.RESELLERRATINGS.COM!!!

 

[Paul]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

In article <xX9Jd.168571$AL5.135920@twister.nyroc.rr.com>, "KC Computers"
<kc@kc-computers.com> wrote:

> "W. Wat son" <wolf_tracks@invalid.inv> wrote in message
> news:569Jd.4264$YD5.3709@newsread3.news.pas.earthlink.net...
> >I have the typical hook up on the board of two USB ports on the panel that
> >contains the keyboard, monitor, etc. There's a small card (4"x2") on the
> >back that is plugged into USB_34 (maybe 56). My front panel has two USB
> >plugs on it. Two bundles emerge with four wires each: D+, D-, ground, and
> >VCC. Where do I hook these guys to on the board. My manual is not clear on
> >this. It's clear how to do this with a multi-lug (8pins?). I don't see that
> >any of these ports are USB2. Is that correct?
>
> The A7S333 board does not have USB 2.0 ports so you would not
> to add a separate PCI card for that. For the connections, you need
> to connect each wire as folllows.
>
> Pin 1 on Mbrd: VCC
> Pin 2 on Mbrd: D-
> Pin 3 on Mbrd: D+
> Pin 4 on Mbrd: GND
>
> Do the same thing for both rows of pins.
>
>
> ---
> Kevin Chalker, Owner KC COMPUTERS
> E-mail: kc@kc-computers.com Web: www.kc-computers.com
> Internet dealer since 1991!!! See WWW.RESELLERRATINGS.COM!!!

There is a nice picture on PDF page 49. VCC is the same thing
as USB_Power:

http://www.asus.com/pub/ASUS/mb/socka/sis745/a7s333/e982_a7s333.pdf

Paul

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

KC Computers wrote:

>
> "W. Wat son" <wolf_tracks@invalid.inv> wrote in message
> news:569Jd.4264$YD5.3709@newsread3.news.pas.earthlink.net...
>
>> I have the typical hook up on the board of two USB ports on the panel
>> that contains the keyboard, monitor, etc. There's a small card (4"x2")
>> on the back that is plugged into USB_34 (maybe 56). My front panel has
>> two USB plugs on it. Two bundles emerge with four wires each: D+, D-,
>> ground, and VCC. Where do I hook these guys to on the board. My manual
>> is not clear on this. It's clear how to do this with a multi-lug
>> (8pins?). I don't see that any of these ports are USB2. Is that correct?
>
>
> The A7S333 board does not have USB 2.0 ports so you would not
> to add a separate PCI card for that. For the connections, you need
> to connect each wire as folllows.
>
> Pin 1 on Mbrd: VCC
> Pin 2 on Mbrd: D-
> Pin 3 on Mbrd: D+
> Pin 4 on Mbrd: GND
>
> Do the same thing for both rows of pins.
>
>
> ---
> Kevin Chalker, Owner KC COMPUTERS
> E-mail: kc@kc-computers.com Web: www.kc-computers.com
> Internet dealer since 1991!!! See WWW.RESELLERRATINGS.COM!!!
>
>
>
Thanks. Did you mean to say add a PCI card for USB2?

--
Wayne T. Watson (Watson Adventures, Prop., Nevada City, CA)
(121.015 Deg. W, 39.262 Deg. N) GMT-8 hr std. time)
Obz Site: 39° 15' 7" N, 121° 2' 32" W, 2700 feet

Most vehicle/deer accidents occur at sunset.
Vehicle deer whistles are ineffective.

Web Page: <home.earthlink.net/~mtnviews>