• Hey there, Guest! Share your idea for a new trophy in the forums and win bragging rights and a $100 Amazon gift card! Check out the New Community Trophy Contest here!
  • Pardon our dust as we work on some regularly scheduled forum maintenance. You may notice some missing features during this time. Thank you for your patience!

use original Recovery Console w/ SP2?

G

Guest

Guest
Archived from groups: microsoft.public.windowsxp.perform_maintain (More info?)

Hi everyone, I have the original XP installation CD that was before any
service packs. I have updated my computer to SP2. I know I cannot install
the Recovery Console as a startup option with the old CD. I would like to
know if I can boot from the old CD and run the RC to fix disk errors.
Having the RC from the old CD fix errors on a partition containing SP2 will
not cause any problems, will it?
 
G

Guest

Guest
Archived from groups: microsoft.public.windowsxp.perform_maintain (More info?)

You can install the Recovery Console with the correct set of these boot
disks:
http://support.microsoft.com/?kbid=310994

--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar
In memory of our dear friend, MVP Alex Nichol
http://www.dts-l.org


"Truth_Seeker1" <DrewStuffL@sbcglobal.net> wrote in message
news:e0Yqe5kXFHA.4032@tk2msftngp13.phx.gbl...
> Hi everyone, I have the original XP installation CD that was before any
> service packs. I have updated my computer to SP2. I know I cannot
> install the Recovery Console as a startup option with the old CD. I would
> like to know if I can boot from the old CD and run the RC to fix disk
> errors. Having the RC from the old CD fix errors on a partition containing
> SP2 will not cause any problems, will it?
>
 
G

Guest

Guest
Archived from groups: microsoft.public.windowsxp.perform_maintain (More info?)

"Jupiter Jones [MVP]" <jones_jupiter@hotnomail.com> wrote in message
news:eqzNL%23nXFHA.3840@tk2msftngp13.phx.gbl...
> You can install the Recovery Console with the correct set of these boot
> disks:
> http://support.microsoft.com/?kbid=310994
>

Wow - that would be a great idea. However I don't have a floppy drive. I
do have a CD-RW drive.
 
G

Guest

Guest
Archived from groups: microsoft.public.windowsxp.perform_maintain (More info?)

Hi, slipstream you original WinXP CD with the SP2 patch and then you can use the
recovery console from the new Win XP SP2 CD you're just created.

Autostreamer
http://www.wbeta.com/comments.php?shownews=1063&catid=2
http://www.autopatcher.com/autostreamer.html

Create a Slip Stream version of Windows XP
http://www.webtree.ca/windowsxp/slipstream.htm

http://www.windows-help.net/WindowsXP/winxp-sp2-bootcd.html
Slipstreaming Windows XP Service Pack 2 and Create Bootable CD

http://www.tacktech.com/display.cfm?ttid=248
Creating a bootable Windows XP

http://www.msfn.org/articles.php?action=show&showarticle=49
Universal Windows Slipstreaming and Bootable CD Guide

http://xphelpandsupport.mvps.org
Click the Windows XP Faq button and take a look at question 83

freeware CD burning application
http://www.cdburnerxp.se/



Service Pack 2 (SP2)
http://www.microsoft.com/downloads/details.aspx?familyid=049c9dbe-3b8e-4f30-8245-9e368d3cdb5a&displaylang=en




Truth_Seeker1 wrote:
> Hi everyone, I have the original XP installation CD that was before
> any service packs. I have updated my computer to SP2. I know I
> cannot install the Recovery Console as a startup option with the old
> CD. I would like to know if I can boot from the old CD and run the
> RC to fix disk errors. Having the RC from the old CD fix errors on a
> partition containing SP2 will not cause any problems, will it?
 
G

Guest

Guest
Archived from groups: microsoft.public.windowsxp.perform_maintain (More info?)

"TaurArian" <taurarianREMOVECAPS@hotmail.com> wrote in message
news:u92wtQnXFHA.796@TK2MSFTNGP09.phx.gbl...
> Hi, slipstream you original WinXP CD with the SP2 patch and then you can
> use the recovery console from the new Win XP SP2 CD you're just created.
>

I'd rather not slipstream because I know very little about CD burning and
that kind of stuff; isn't there an easier option?
 
G

Guest

Guest
Archived from groups: microsoft.public.windowsxp.perform_maintain (More info?)

"Truth_Seeker1" <DrewStuffL@sbcglobal.net> wrote in message
news:uiUL3huXFHA.3320@TK2MSFTNGP12.phx.gbl...
> "TaurArian" <taurarianREMOVECAPS@hotmail.com> wrote in message
> news:u92wtQnXFHA.796@TK2MSFTNGP09.phx.gbl...
>> Hi, slipstream you original WinXP CD with the SP2 patch and then you can
>> use the recovery console from the new Win XP SP2 CD you're just created.
>>
>
> I'd rather not slipstream because I know very little about CD burning and
> that kind of stuff; isn't there an easier option?

Instead of slipstreaming, and instead of installing the Recovery Console
onto my HD, can't I just run the RC from my old XP CD to repair my hard
drive? Even though the CD is pre-service pack 2?
 
G

Guest

Guest
Archived from groups: microsoft.public.windowsxp.perform_maintain (More info?)

"Truth_Seeker1" <DrewStuffL@sbcglobal.net> wrote in message
news:uoLenTvXFHA.3996@TK2MSFTNGP10.phx.gbl...
>
> "Truth_Seeker1" <DrewStuffL@sbcglobal.net> wrote in message
> news:uiUL3huXFHA.3320@TK2MSFTNGP12.phx.gbl...
>> "TaurArian" <taurarianREMOVECAPS@hotmail.com> wrote in message
>> news:u92wtQnXFHA.796@TK2MSFTNGP09.phx.gbl...
>>> Hi, slipstream you original WinXP CD with the SP2 patch and then you can
>>> use the recovery console from the new Win XP SP2 CD you're just created.
>>>
>>
>> I'd rather not slipstream because I know very little about CD burning and
>> that kind of stuff; isn't there an easier option?
>
> Instead of slipstreaming, and instead of installing the Recovery Console
> onto my HD, can't I just run the RC from my old XP CD to repair my hard
> drive? Even though the CD is pre-service pack 2?
The only file of which I am aware that RC accesses from the Windows
installation on C: is a file called Autochk.exe[is this correct?]. When the
Recovery Console accesses this file and finds it to be a newer version (SP2)
than what it is expecting, does that confuse RC?
 
G

Guest

Guest
Archived from groups: microsoft.public.windowsxp.perform_maintain (More info?)

Then you will need to slipstream as already suggested.

--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar
In memory of our dear friend, MVP Alex Nichol
http://www.dts-l.org


"Truth_Seeker1" <DrewStuffL@sbcglobal.net> wrote in message
> Wow - that would be a great idea. However I don't have a floppy drive. I
> do have a CD-RW drive.
 
G

Guest

Guest
Archived from groups: microsoft.public.windowsxp.perform_maintain (More info?)

Autostreamer (slipstreaming) is easy, get someone to assist you if necessary.

http://www.wbeta.com/comments.php?shownews=1063&catid=2
See this for instructions on how to use:-
http://www.simplyguides.net/guides/using_autostreamer/using_autostreamer.html


"Truth_Seeker1" <DrewStuffL@sbcglobal.net> wrote in message
news:e8qwAbvXFHA.160@TK2MSFTNGP15.phx.gbl...
>
> "Truth_Seeker1" <DrewStuffL@sbcglobal.net> wrote in message
> news:uoLenTvXFHA.3996@TK2MSFTNGP10.phx.gbl...
>>
>> "Truth_Seeker1" <DrewStuffL@sbcglobal.net> wrote in message
>> news:uiUL3huXFHA.3320@TK2MSFTNGP12.phx.gbl...
>>> "TaurArian" <taurarianREMOVECAPS@hotmail.com> wrote in message
>>> news:u92wtQnXFHA.796@TK2MSFTNGP09.phx.gbl...
>>>> Hi, slipstream you original WinXP CD with the SP2 patch and then you can use the
>>>> recovery console from the new Win XP SP2 CD you're just created.
>>>>
>>>
>>> I'd rather not slipstream because I know very little about CD burning and that
>>> kind of stuff; isn't there an easier option?
>>
>> Instead of slipstreaming, and instead of installing the Recovery Console onto my
>> HD, can't I just run the RC from my old XP CD to repair my hard drive? Even
>> though the CD is pre-service pack 2?
> The only file of which I am aware that RC accesses from the Windows installation on
> C: is a file called Autochk.exe[is this correct?]. When the Recovery Console
> accesses this file and finds it to be a newer version (SP2) than what it is
> expecting, does that confuse RC?
>
 
G

Guest

Guest
Archived from groups: microsoft.public.windowsxp.perform_maintain (More info?)

No one can tell me whether it'll cause problems if I just boot off of my old
XP CD and run the old RC from there? Even though the CD is pre-service pack
2 and my hard drive has SP2 installed?

"Truth_Seeker1" <DrewStuffL@sbcglobal.net> wrote in message
news:e8qwAbvXFHA.160@TK2MSFTNGP15.phx.gbl...
>
> "Truth_Seeker1" <DrewStuffL@sbcglobal.net> wrote in message
> news:uoLenTvXFHA.3996@TK2MSFTNGP10.phx.gbl...
>>
>> "Truth_Seeker1" <DrewStuffL@sbcglobal.net> wrote in message
>> news:uiUL3huXFHA.3320@TK2MSFTNGP12.phx.gbl...
>>> "TaurArian" <taurarianREMOVECAPS@hotmail.com> wrote in message
>>> news:u92wtQnXFHA.796@TK2MSFTNGP09.phx.gbl...
>>>> Hi, slipstream you original WinXP CD with the SP2 patch and then you
>>>> can use the recovery console from the new Win XP SP2 CD you're just
>>>> created.
>>>>
>>>
>>> I'd rather not slipstream because I know very little about CD burning
>>> and that kind of stuff; isn't there an easier option?
>>
>> Instead of slipstreaming, and instead of installing the Recovery Console
>> onto my HD, can't I just run the RC from my old XP CD to repair my hard
>> drive? Even though the CD is pre-service pack 2?
> The only file of which I am aware that RC accesses from the Windows
> installation on C: is a file called Autochk.exe[is this correct?]. When
> the Recovery Console accesses this file and finds it to be a newer version
> (SP2) than what it is expecting, does that confuse RC?
>