Use other ram

[mezal1981]

hai, dear community i would like to ask about Ram:
i just bought a new ram hyper x 800mzh.and my board is msi 750i platinum can i use the hyper x 1066mhz or i just use the hyper x 800 and overclock it.

 

[evongugg]

Use both.
Make sure you set the voltage to the highest one between the DDR2-800 and DDR2-1066.
If you overclock the DDR2-800, check for errors with memtest86+.

 

[mezal1981]

thank u for answer my question,thank u very much. but i have another question going in my mind do the hyper x have not similar latency timing and if i install what wi ll the mainbord detect ,800 or 1066. And wich one ill install fist in memory slot.

 

[evongugg]

Put the latency at the highest numbers or tighten them up and check with memtest86+.
The motherboard initially should detect the DDR-1066 as DDR2-800.
In the first memory slot put your largest and fastest memory. Really doesn't matter too much.

 

[mezal1981]

thank u your answer.it very helpful.can i use the hyper x 1066 and overclock it to 1333 becouse i just bought all ram a new hyper x 1066 x4

 

[evongugg]

You can try pushing it that far. You'll probably need to raise the voltage to 2.1v. Make sure you test it for errors with memtest86+.