G
Guest
Guest
I just installed a k6-2 450 into this with two 32 mb simms.
I tried to set the bus at 100 and the clock multiplier at 4.5; with no luck. It sounds fine in when I turn it on but there is no singal sent to the monitor. I've tried 95/83 mhz bus speeds with different clock ratios.
I believe this problem stems from my memory, am I going to need to get sdram to reach the bus speed I want? And also is the 124 mhz bus speed option stable? With 256mb of sdram and 1mb 5ns cache will I be able to OC? And off the subject does buffer memory effect the performance of hard drives?
I tried to set the bus at 100 and the clock multiplier at 4.5; with no luck. It sounds fine in when I turn it on but there is no singal sent to the monitor. I've tried 95/83 mhz bus speeds with different clock ratios.
I believe this problem stems from my memory, am I going to need to get sdram to reach the bus speed I want? And also is the 124 mhz bus speed option stable? With 256mb of sdram and 1mb 5ns cache will I be able to OC? And off the subject does buffer memory effect the performance of hard drives?