[SOLVED] Vcore Not Showing in Core Temp After OC

[lopez.mr.22]

After overclocking my CPU to 4.7GHz at 1.26v and enabling XMP for the memory at 3000MHz 1.32v I dont show Vcore in Core Temp or CPU-Z.

Anyone know why this might be?

 

[terry4536]

Do a hard boot, and then try your applications again. Powering down the system and turning off the power supply and unplugging the power supply for a few minutes will clear the applications.

 

[The Original Ralph]

After overclocking my CPU to 4.7GHz at 1.26v and enabling XMP for the memory at 3000MHz 1.32v I dont show Vcore in Core Temp or CPU-Z.

Anyone know why this might be?

dis-able XMP and see if that brings it back -

 

[terry4536]

If it still happens, try redoing the overclock.

 

[lopez.mr.22]

Do a hard boot, and then try your applications again. Powering down the system and turning off the power supply and unplugging the power supply for a few minutes will clear the applications.

After overclocking my CPU to 4.7GHz at 1.26v and enabling XMP for the memory at 3000MHz 1.32v I dont show Vcore in Core Temp or CPU-Z.

Anyone know why this might be?

dis-able XMP and see if that brings it back -

I enabled XMP first prior to overclocking the CPU and when I ran stress tests the vcore was showing. Worth a shot though. Thanks!

 

[lopez.mr.22]

Do a hard boot, and then try your applications again. Powering down the system and turning off the power supply and unplugging the power supply for a few minutes will clear the applications.

Thanks! I'll give this a shot.

 

[Anik Talukder]

Do a hard boot, and then try your applications again. Powering down the system and turning off the power supply and unplugging the power supply for a few minutes will clear the applications.

Thanks! I'll give this a shot.

If you disabled SVID Support in Bios when overclocking then theres your culprit

 

[lopez.mr.22]

Do a hard boot, and then try your applications again. Powering down the system and turning off the power supply and unplugging the power supply for a few minutes will clear the applications.

Thanks! I'll give this a shot.

If you disabled SVID Support in Bios when overclocking then theres your culprit

Weird, I’ve used the same settings while testing for stability and had been able to see vcore in intel tuning extreme and CoreTemp. Wonder why this would all of the sudden it would change.

I believe SVID is supposed to be disabled when overclocking, correct?

 

[Anik Talukder]

Do a hard boot, and then try your applications again. Powering down the system and turning off the power supply and unplugging the power supply for a few minutes will clear the applications.

Thanks! I'll give this a shot.

If you disabled SVID Support in Bios when overclocking then theres your culprit

Weird, I’ve used the same settings while testing for stability and had been able to see vcore in intel tuning extreme and CoreTemp. Wonder why this would all of the sudden it would change.

I believe SVID is supposed to be disabled when overclocking, correct?

Well on adaptive SVID should be on, if you can manage other how to regulate voltage so it doesnt spike than svid can be set to auto
give it a try