[SOLVED] Vengeance PRO RGB cooler clearance

[rvp7788]

i don't know if i should post this question here or on the coolers section, anyway, i have a single stick of 8gb vengeance pro rgb ram populated in the second left dim slot, will i have clearance issues if i use an aftermarket cpu cooler like the Gammax 400 or CM t4 and so on..?

 

[cin19]

I only found the vengeance RAM spec. https://www.corsair.com/corsairmedia/sys_master/productcontent/faq_Corsair-Memory-FAQ-Content-3.jpg because you had the rgb version so that make the measurement to see it is same or not.

If it is as same as the regular vengeance version, you got the clearance problem. Here is the cooler from deepcool site: http://www.deepcool.com/product/cpucooler/2013-12/7_487.shtml

And the other one CMt4 has the same problem, the RAM will not fit under the cooler fan. https://www.coolermaster.com/catalog/coolers/cpu-air-coolers/hyper-t4/

 

[rvp7788]

I only found the vengeance RAM spec. https://www.corsair.com/corsairmedia/sys_master/productcontent/faq_Corsair-Memory-FAQ-Content-3.jpg because you had the rgb version so that make the measurement to see it is same or not.

If it is as same as the regular vengeance version, you got the clearance problem. Here is the cooler from deepcool site: http://www.deepcool.com/product/cpucooler/2013-12/7_487.shtml

And the other one CMt4 has the same problem, the RAM will not fit under the cooler fan. https://www.coolermaster.com/catalog/coolers/cpu-air-coolers/hyper-t4/

so even if i use the second dim slot only and mount the cooler vertically i'll have clearance issues ??

 

[cin19]

I found one picture for the Gammax 400 on the MB, it looks like the you don't have any clearance problem, because the fan is slim type. Sorry about I said before you got the problem. But you can use the 2nd RAM slot too.
https://www.evetech.co.za/repository/ProductImages/deepcool-gammaxx-400-cpu-cooler-00001.jpg