Verrrrrrrrry Strange Issue........

[1989matthew1989]

hey there guys, got a bit of an issue here that needs more than my brain can figure out. i have 2 AMD AM3+ computers, one as a gaming PC, one as a media server

specs of system one :
AM8320CPU
Sabertooth 990fx r2.0
16gb corsair Vengence ram
intel 520 120gbSSD
AMD r9290 (x2)

specs of system 2
am6350 CPU
Asrock Extreme3 r2.0
8gb corsair value ram
corsair LX 120gb SSD
amd 5320 GPU

ok, the issue is this - on BOTH systems, after some shutdowns or reboots i get 'device not recognised - insert boot device to continue'

things tried -
swap sata cable
swap sata port
swap sata controller
update SSD firmware
Cry
Swear at the computers

computers were solid, no crashes or reboots before upgrading to windows 10.

P.S - not the sandforce bug because the corsair LX series uses the Phison controller

1) any ideas?
2) anyone else got this issue? shall i go back to windows 8.1? (i have backups)

 

[basroil]

I think you forgot taking a baseball bat to them 😉

Jokes aside, do the drives show up on the bios and boot menu?

 

[smorizio]

as it both of them. check the power supply make sure there holding to the atx spec. if not the ssd would should issue as they need clean power to run.

 

[smorizio]

if there in the same room and on the same power..move one see if anything changes. may be pulling more power then one wall outlet can output.

 

[1989matthew1989]

no - drives do NOT show in bios/boot menu, they are not rebooting at the same time, my gaming one for example didnt load up straight away after being asleep. i have a corsair ax760i and RM1000i and both are reporting (through link) the correct voltages. it is still strange to me this has ONLY happened after upgrading to windows 10! perhaps it is down to the way 10 shuts down?

 

[1989matthew1989]

update : checked admin logs, doesnt seem to be cleanly shutting down.... hmmmm

 

[1989matthew1989]

also - computers are on seperate ringmains