Question Vertical GPU mount ?

mrclownface

Distinguished
Aug 9, 2009
646
7
19,065
Hi there,
I have a Lian Li 216 lancool case and i want to vertically mount an MSI 2070 Super graphics card.
I purchased an Asus Rog Strix riser cable but I found that the mounting holes in the cable did not line up with the standoffs that screw into the case to support the card.

On this case you can mount the card without buying an additional bracket because the bracket on the rear of the case can be removed and mounted vertically.
I'm just not sure why it wouldnt fit. Are the mounting points on the riser cables different for gen 3.0
compared to gen 4.0?

https://www.scorptec.com.au/product/motherboards/amd-socket-am4/83371-b550-a-pro

https://www.scorptec.com.au/product/cases/casemods-&-upgrades/85445-rs200-rog-strix-riser-cable
 
Last edited:

Lutfij

Titan
Moderator
This is what you should've gotten to ensure you didn't run into compatibility issues;
listed here;
https://lian-li.com/product/lancool-216/?cn-reloaded=1
and can be found here;
https://www.scorptec.com.au/product/cases/casemods-&-upgrades/88335-pw-pci-420
 
  • Like
Reactions: MEMOFLEX

mrclownface

Distinguished
Aug 9, 2009
646
7
19,065
This is what you should've gotten to ensure you didn't run into compatibility issues;
listed here;
https://lian-li.com/product/lancool-216/?cn-reloaded=1
and can be found here;
https://www.scorptec.com.au/product/cases/casemods-&-upgrades/88335-pw-pci-420
i suspect you are correct,i will order that rise asap