Hi!
I have the system:
CPU Intel i7-7700k stock
MB Asus TUF Z270 Mark2 latest BIOS
DDR4 2x8 GB Corsair 3200 Vengeance
PSU Seasonic 520W fanless
SSD M.2 Samsung 960 pro 512 GB
SSD Samsung 850 EVO 500 GB
and 1 SSD & 1 HDD.
Videocard AMD HD 6800 fanless
SO Windows 10 Home
I am novice in PC knowledge so.....
I got this system recently.
EVERY time I start PC (after i shut it down first) I got ”VGA no signal”.
When I restart PC I don't have this problem. All works fine.
#1 solution I found and ”works” is:
remove power cable from PSU / press & hold power ON button from PC case for 60 seconds / after those 60 seconds I plug in power cable in PSU / press power ON button. AND i have image on screen, windows starts, all nice and good (i can play even videogames). No problem at all.
BUT when I shutdown PC and try to start it, same. VGA NO SIGNAL!!!!
So I do again solution #1. And so on and on and on. For 3 days.
Please provide help!
Thank you!
I have the system:
CPU Intel i7-7700k stock
MB Asus TUF Z270 Mark2 latest BIOS
DDR4 2x8 GB Corsair 3200 Vengeance
PSU Seasonic 520W fanless
SSD M.2 Samsung 960 pro 512 GB
SSD Samsung 850 EVO 500 GB
and 1 SSD & 1 HDD.
Videocard AMD HD 6800 fanless
SO Windows 10 Home
I am novice in PC knowledge so.....
I got this system recently.
EVERY time I start PC (after i shut it down first) I got ”VGA no signal”.
When I restart PC I don't have this problem. All works fine.
#1 solution I found and ”works” is:
remove power cable from PSU / press & hold power ON button from PC case for 60 seconds / after those 60 seconds I plug in power cable in PSU / press power ON button. AND i have image on screen, windows starts, all nice and good (i can play even videogames). No problem at all.
BUT when I shutdown PC and try to start it, same. VGA NO SIGNAL!!!!
So I do again solution #1. And so on and on and on. For 3 days.
Please provide help!
Thank you!