Hey all; I just started a build for a neighbor today; after I got everything plugged in, I fired it up. The CPU fan ran intermittently, the front case fans not at all, and the rear case fan ran fine. I pulled the power supply to test it, and ran in to something I haven’t before.
The PsU is a power spec 650w Bronze.
my yellow 12v are reading 14.86
My orange 3.3 are reading 4.13
My red 5v is reading 6.54
My blue -12v is reading -14.16
My purple 5v is reading 6.25
I have never run into this....... I’ve only ever testing PsU’s and found them nominal or dead..... not putting out extra voltage; I also have no idea whether this is bad; my gut says it’s bad.... but maybe I’m wrong.
Ideas?
Thanks in advance!
banjo
The PsU is a power spec 650w Bronze.
my yellow 12v are reading 14.86
My orange 3.3 are reading 4.13
My red 5v is reading 6.54
My blue -12v is reading -14.16
My purple 5v is reading 6.25
I have never run into this....... I’ve only ever testing PsU’s and found them nominal or dead..... not putting out extra voltage; I also have no idea whether this is bad; my gut says it’s bad.... but maybe I’m wrong.
Ideas?
Thanks in advance!
banjo