Voltage settings

[pastorjay]

Hey all,
I am not real experienced with voltage and Mboards, so I need some advice.
I use Via hardware monitor, and here is what it shows (I have a gigabyte 7zxr board).
Vcore Value = 1.78
2.5v value = 3.30
3.3 v value = 3.35
5v value = 4.98
12v value = 12.07
Is there a problem with the 2.5 value being so high? Will it hurt anything? thanks for the help...

 

[Guest]

That does seem a bit high. If your system is stable then it should be ok. I would watch it though. If you are able to adjust the voltage settings in your BIOS, you shoul take a look to see if you can set that one. Even if it says it is set right, you should lower it slightly to see if it has an effect. If you can't set it then there is not a whole lot you can do.