G
Guest
Guest
Archived from groups: comp.sys.hp.apps,comp.sys.hp.hardware,comp.sys.misc,comp.sys.hp.mpe,comp.sys.hp.hpux (More info?)
I found on HP website the document : "Configuring Microsoft® Windows® Server
2003 on the HP Integrity Server, Enterprise Edition" ( c00090141.pdf ) ...
I installed W2K3 trought lan - MP, and when it's installed, i try to set the
ip address with SAC, i've
the message :"SAC could not set the IP Address."...
"
SAC>I
Net: 2, Ip=0.0.0.0 Subnet=0.0.0.0 Gateway=0.0.0.0
SAC>I 2 10.100.13.136 255.255.254.0 10.100.13.253
SAC could not set the IP Address.
SAC>i 0 10.100.13.136 255.255.255.0 10.100.13.253
SAC could not clear the existing IP Address.
SAC>i 1 10.100.13.136 255.255.255.0 10.100.13.253
SAC could not retrieve the IP Address.
SAC>
"
----------------------------------------------------------
and from CMD :
"
C:\WINDOWS\system32>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
C:\WINDOWS\system32>ipconfig /renew #to see if it can reach the DHCP
server...
Windows IP Configuration
No operation can be performed on Local Area Connection while it has its
media disconnected.
C:\WINDOWS\system32>route print
IPv4 Route Table
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x10003 ...00 XX 6e XX 9a XX ...... Broadcom NetXtreme Gigabit Ethernet
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
255.255.255.255 255.255.255.255 255.255.255.255 10003 1
===========================================================================
Persistent Routes:
None
C:\WINDOWS\system32>
"
----------------------------------------------------------
Driver Broadcom NetXtreme Gigabit Ethernet found... OK Mac add. - Cable is
connected!!! This is operational with HP-UX OS.
----------------------------------------------------------
I'll try a new installation, but i'm afraid to have the same msg...
Does anyone have an idea?
Sincerely,
Jérôme
Belgium
I found on HP website the document : "Configuring Microsoft® Windows® Server
2003 on the HP Integrity Server, Enterprise Edition" ( c00090141.pdf ) ...
I installed W2K3 trought lan - MP, and when it's installed, i try to set the
ip address with SAC, i've
the message :"SAC could not set the IP Address."...
"
SAC>I
Net: 2, Ip=0.0.0.0 Subnet=0.0.0.0 Gateway=0.0.0.0
SAC>I 2 10.100.13.136 255.255.254.0 10.100.13.253
SAC could not set the IP Address.
SAC>i 0 10.100.13.136 255.255.255.0 10.100.13.253
SAC could not clear the existing IP Address.
SAC>i 1 10.100.13.136 255.255.255.0 10.100.13.253
SAC could not retrieve the IP Address.
SAC>
"
----------------------------------------------------------
and from CMD :
"
C:\WINDOWS\system32>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
C:\WINDOWS\system32>ipconfig /renew #to see if it can reach the DHCP
server...
Windows IP Configuration
No operation can be performed on Local Area Connection while it has its
media disconnected.
C:\WINDOWS\system32>route print
IPv4 Route Table
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x10003 ...00 XX 6e XX 9a XX ...... Broadcom NetXtreme Gigabit Ethernet
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
255.255.255.255 255.255.255.255 255.255.255.255 10003 1
===========================================================================
Persistent Routes:
None
C:\WINDOWS\system32>
"
----------------------------------------------------------
Driver Broadcom NetXtreme Gigabit Ethernet found... OK Mac add. - Cable is
connected!!! This is operational with HP-UX OS.
----------------------------------------------------------
I'll try a new installation, but i'm afraid to have the same msg...
Does anyone have an idea?
Sincerely,
Jérôme
Belgium