G
Guest
Guest
Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)
This is on a dual board a GA-6BXDwin2K sp4.
On starting up I get the audible warning and think, Ah yes one of the
CPU fans has packed up. No, both are running fine but the BIOS are
showing
that number one CPU fan is not running. The no one CPU is actually a
degree c lower!
OK I then turn off the warning for both fans and all goes well until
later in the start up and the warning comes on again and stays on. In
desperation I pull the board connector.
I do not want to leave the situation unresolved and wonder if anyone has
any suggestions. Only untoward happening prior to this was I plugged
in an old PCI graphics card to run a second monitor. This turned out
not be any good. I have been using the AGP slot since building this
box several years ago and it has been pretty reliable.
Cheers
Richard
--
Richard Kenward
This is on a dual board a GA-6BXDwin2K sp4.
On starting up I get the audible warning and think, Ah yes one of the
CPU fans has packed up. No, both are running fine but the BIOS are
showing
that number one CPU fan is not running. The no one CPU is actually a
degree c lower!
OK I then turn off the warning for both fans and all goes well until
later in the start up and the warning comes on again and stays on. In
desperation I pull the board connector.
I do not want to leave the situation unresolved and wonder if anyone has
any suggestions. Only untoward happening prior to this was I plugged
in an old PCI graphics card to run a second monitor. This turned out
not be any good. I have been using the AGP slot since building this
box several years ago and it has been pretty reliable.
Cheers
Richard
--
Richard Kenward