hello folks,
i got a 2700k cpu and planning to configure two 680 sli, and i do plan to over clock. but i got a small case. a lain li v354.
i'm planning to water cool the cpu and the two 680.
my intention is to use the XSPC RX360 Triple 120mm Radiator and the swiftech ddc mcp35x pump with the matching reservoir. the water block is to be determine, but my current hurtle is making sure the radiator can dissipate the cpu and two video cards quickly enough and the pump can handle the load of the plumbing circuit.
i only have an ssd and a 1tb mechanical, both are 2.5' drive mounted on the bottom of the chassis floor. the rest of the case is pretty roomy and open. but i'm sure the triple rad will not fit the inside the case, so it will have to be mounted on the outside of the case.
if you have better ideas or recommendations please let me know.
thanks
i got a 2700k cpu and planning to configure two 680 sli, and i do plan to over clock. but i got a small case. a lain li v354.
i'm planning to water cool the cpu and the two 680.
my intention is to use the XSPC RX360 Triple 120mm Radiator and the swiftech ddc mcp35x pump with the matching reservoir. the water block is to be determine, but my current hurtle is making sure the radiator can dissipate the cpu and two video cards quickly enough and the pump can handle the load of the plumbing circuit.
i only have an ssd and a 1tb mechanical, both are 2.5' drive mounted on the bottom of the chassis floor. the rest of the case is pretty roomy and open. but i'm sure the triple rad will not fit the inside the case, so it will have to be mounted on the outside of the case.
if you have better ideas or recommendations please let me know.
thanks