Well the Zalman Reserator 1 V2 take me to 4GHz?(Water Cooling System)

[waly]

Hey evreyone!! I have a Q6600 and want to overclock it to 4GHz !! Well the Zalman Reserator 1 V2 Water Cooling System get me there??

http://www.newegg.com/Product/Product.aspx?Item=N82E16835118015

 

[Yager]

Hey evreyone!! I have a Q6600 and want to overclock it to 4GHz !! Well the Zalman Reserator 1 V2 Water Cooling System get me there??

http://www.newegg.com/Product/Product.aspx?Item=N82E16835118015

Not gonna happen
I'd say 3.6 max

 

[goodie]

Not gonna happen
I'd say 3.6 max

surely if he has a good VID it will get him to 3.8.
i've heard quite a few people getting 3.8 with a TRUE

 

[waly]

what well get it to 4ghz??? im @3.6 stable now with a tuniq tower

 

[iluvgillgill]

TRUE can do 3.8 on the Q6600 but i saw some review that WC kit he's got cant match the best of aircool. which unfortunately its the TRUE and Xiggy. so the answer to OP IS NO!sorry.

 

[Lupiron]

Wow, no one asks him to run Core Temp and list his VID?

We already know that if he just got it retail, its 1.3000 or higher.

How about Waly, list it!

--Lupi

 

[iluvgillgill]

Wow, no one asks him to run Core Temp and list his VID?

--Lupi

you just reminded me!my wrong!

 

[Evilonigiri]

Anandtech did a review on the Q6600 before. Dunno what VID it was, but with WCing, 4GHz was attained. Expect 1.5V+.

 

[HoLLoW]

Hey evreyone!! I have a Q6600 and want to overclock it to 4GHz !! Well the Zalman Reserator 1 V2 Water Cooling System get me there??

http://www.newegg.com/Product/Product.aspx?Item=N82E16835118015

If you want to take it to the 4GHz SAFELY then you will need a dedicated CPU cooler which must be either a Peltier Effect Block+Water Cooling OR a Phase-Change Unit like one offered by OCZ. http://www.ocztechnology.com/products/cooling_products/ocz_cryo_z
for a surprisingly low 300$ US

 

[Lupiron]

I agree with HoLLoW.

Try 1 of these:
http://jab-tech.com/Black-Ice-GTX-480-Radiator-pr-3614.html

Then 4 of these:
http://www.sidewindercomputers.com/de12tfexhisp.html

Try one of these too:
http://jab-tech.com/Apogee-GTX-Extreme-Performance-CPU-Waterblock-pr-3730.html

The Res and pump should also be good, but you have more lee way on getting good gear. Use the largest tubings they all support.

I did alot of testing on the q6600 series, and you'll need some serious voltage to reach 4.0 stable in prime for over an hour. (yet alone, 8 hours.)

And Run Core Temp, and list your VID. That's gonna be a big factor right there. Hope it isn't a retail q6600 from, say, between now and 4 months ago. Gonna be a 1.3000 or worse if it was!

--Lupi

 

[iluvgillgill]

what case can house the quad 120mm radiator?

 

[rubix_1011]

4.0, 1.225 VID on water only. 8x500FSB, NB block.

I don't know of any case that you can really get the 4x120 on...I would think its too long. Maybe a 4x120 square, like on Frozencpu.com.

http://www.frozencpu.com/products/5...l_XTREME_Quad_480_Radiator.html?tl=g30c95s667

 

[Lupiron]

Gill! Prolly any case you wanna mod the side will house it. Other than that, a double tower case! I found one, some dude was trashing it, and it's one of those that house double mobos!

So I can use the upper Mobo area for water junk, and anything else, and still have a tower size case left, lol!!

Got me, haven't done the measuring yet!

And I need to build a 300 watt fan controller. The fans pull 30 watts each! x 4! And just in case I do a push pull, thats 8 fans! WoW! Need that 300 watts!

--Lupi

 

[Lupiron]

Damn, they are always out of stock on the good gear!!!

That Rad looks interesting!!

Were is my Padawan? He is supposed to do the research, I just read the review, and fork over the cash!

--Lupi

 

[rubix_1011]

Yeah, I thought about that radiator, but went with a transmission and oil cooler for cars; 1/2" ID all copper tubing, all copper fins. I had to connect the 2 coolant passages with a loop and it gave me an 8-pass passive heat exchanger in addition to my 2x120mm BlackIce.

http://store.summitracing.com/partdetail.asp?autofilter=1&part=DER-15902B&N=700+0&autoview=sku