Question what are the bios tweakings necessary with a rtx 4070ti

[maillet]

m'y gpu constantly resets the display and the leds arent even working on the card. i would like to Know what are the proper tweakings to do in the bios

 

[GarrettL]

None.

You have other issues.

Please list full pc specs including PSU

 

[maillet]

CPU: AMD RYZEN 7 5800X
Motherboard: GIGABYTE X570 AORUS MASTER
RAM: 32Gb Patriot Viper Steel Series 3200Mhz
Graphics: rtx 4070 ti,
SSD 1: Samsung 980 PRO 1To - M.2 NVMe
SSD 2: Crucial MX500 1To
Power supply: SeaSonic Focus Plus series, 850W, gold certified, full Modular

 

[GarrettL]

What gpu were you previously using?

The typical route is to remove all old pgu drivers using DDU.

You could try this as well, download the latest drivers for the 4070 ti. I don't recommend installing the GForce Experience but you can if you'd like. But first I would just install the drivers and choose the custom settings. In the lower portion of the pop up box there is an option to do a "Clean Install", try that first.

Are using a known good Display Port Cable?

 

[maillet]

i was using a radeon 6900xt and everything went well. i had to tweak the bios to make it work. i Will Just reset all the bios anyways. the problem was i was not getting any lights or fan working even tho the card was doing fine at gaming.

 

[GarrettL]

I'm not sure what you refrence to as twekaing of the BIOS.

If you did not use DDU then I (and many others) would highly reccommend trying this method.

 

[maillet]

what is ddu?

 

[maillet]

for the radeon to work i had to Turn on rebar and above 4g decoding allo Turn off csm

 

[GarrettL]

Switching from AMD to Nvidia: How to Do It (The Right Way)

A helpful step-by-step guide to switching your AMD GPU to an Nvidia GPU. Tips and troubleshooting included.

cybersided.com

 

[maillet]

sounds interresting ama recieve m'y New gpu today and i Will do as told. also Will reset the bios

 

[maillet]

still wont get the card leds and fan working

 

[maillet]

the card seems to work fine but still i cant get the leds on board to turn on fine