So, im starting a new high end build with a custom loop and custom sleeved cables etc and i just want to make sure I buy all the correct cables. My build is as follows
CPU - Intel i7 7800X
Motherboard - Asus Strix X299-E Gaming
GPU - GeForce GTX 1080Ti ROG Strix
RAM - Corsair Vengeance RGB 32GB
Storage - Seagate Barracuda 4TB HDD
Samsung 850 EVO Pro 500GB SSD
PSU - BeQuiet Dark Power Pro 11 750w 80+ Platinum
Case - NZXT Noctis 450 ROG Edition
Case Fan - Corsair Air Series AF12 x1
And Custom Loop components
EK-CoolStream PE 240 (Dual) x2
EK-XTOP Revo D5 PWM - (incl. sleeved pump) x1
EK-RES X3 110 x1
EK-Supremacy EVO X99 - Nickel x1
EK-FC1080 GTX Ti Strix - Nickel x1
EK-FC1080 GTX Ti Strix Backplate - Black x1
EK-HD Tube 10/12mm 500mm (2 pcs) x3
EK-HDC Fitting 12mm G1/4 - Black x12
EK-CryoFuel Blood Red Concentrate 100 ml x2
EK-ATX Bridging Plug (24 pin) x1
EK-Cable Y-Splitter 2-Fan PWM (10cm) x2
Corsair Air Series AF12 x4
I understand that there may e too much information here, but i'd rather give too much than not enough. So what I need to know is, what cables am I going to have to get custom sleeves for?
Thanks for all your help
CPU - Intel i7 7800X
Motherboard - Asus Strix X299-E Gaming
GPU - GeForce GTX 1080Ti ROG Strix
RAM - Corsair Vengeance RGB 32GB
Storage - Seagate Barracuda 4TB HDD
Samsung 850 EVO Pro 500GB SSD
PSU - BeQuiet Dark Power Pro 11 750w 80+ Platinum
Case - NZXT Noctis 450 ROG Edition
Case Fan - Corsair Air Series AF12 x1
And Custom Loop components
EK-CoolStream PE 240 (Dual) x2
EK-XTOP Revo D5 PWM - (incl. sleeved pump) x1
EK-RES X3 110 x1
EK-Supremacy EVO X99 - Nickel x1
EK-FC1080 GTX Ti Strix - Nickel x1
EK-FC1080 GTX Ti Strix Backplate - Black x1
EK-HD Tube 10/12mm 500mm (2 pcs) x3
EK-HDC Fitting 12mm G1/4 - Black x12
EK-CryoFuel Blood Red Concentrate 100 ml x2
EK-ATX Bridging Plug (24 pin) x1
EK-Cable Y-Splitter 2-Fan PWM (10cm) x2
Corsair Air Series AF12 x4
I understand that there may e too much information here, but i'd rather give too much than not enough. So what I need to know is, what cables am I going to have to get custom sleeves for?
Thanks for all your help