[SOLVED] What header do I plug my aio pump and fans into

[Zas34]

Hello, I have a gigabyte gaming 7 Z370 motherboard. Also I have a cooler master 240mm aio. Right now I have my pump plugged into the CPU_OPT. I have the fans connected onto the radiator plugged into the CPU_FAN header. Is this the right configuration.

 

[siaan312]

cpu_opt and cpu_fan are both the cpu cooler headers.
this configuration will work nicely, but, you could also plug the fans into the pump and the pump into cpu_fan for more control
unless coolermaster doesnt do that
if so then yes that will work


also, some boards have aio_pump headers.
you could use that too

 

[CountMike]

Hello, I have a gigabyte gaming 7 Z370 motherboard. Also I have a cooler master 240mm aio. Right now I have my pump plugged into the CPU_OPT. I have the fans connected onto the radiator plugged into the CPU_FAN header. Is this the right configuration.

If it's older CM AiO, connect pump to w_Pump connector and make sure it's set to full speed.
Fans ca go to CPU_FAN and CPU_OPT headers.