what is my RAM'S CAS LATENCY

[Prdp]

This is the CPU-Z report abot my RAM.. can anyone tell me whats my CAS Latency?

Memory SPD
-------------------------------------------------------------------------

DIMM # 1
SMBus address 0x52
Memory type DDR3
Module format SO-DIMM
Manufacturer (ID) Nanya Technology (7F7F7F0B00000000)
Size 4096 MBytes
Max bandwidth PC3-12800 (800 MHz)
Part number NT4GC64B8HG0NS-DI
Serial number 6637127C
Manufacturing date Week 27/Year 12
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP no
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 5.0-5-5-14-19 @ 380 MHz
JEDEC #2 6.0-6-6-16-22 @ 457 MHz
JEDEC #3 7.0-7-7-19-26 @ 533 MHz
JEDEC #4 8.0-8-8-22-30 @ 609 MHz
JEDEC #5 9.0-9-9-24-33 @ 685 MHz
JEDEC #6 10.0-10-10-27-37 @ 761 MHz
JEDEC #7 11.0-11-11-30-41 @ 838 MHz

Chipset
-------------------------------------------------------------------------

Northbridge Intel Ivy Bridge rev. 09
Southbridge Intel HM77 rev. 04
Graphic Interface PCI-Express
PCI-E Link Width x8
PCI-E Max Link Width x16
Memory Type DDR3
Memory Size 4 GBytes
Channels Single
Memory Frequency 798.1 MHz (1:6)
CAS# latency (CL) 11.0
RAS# to CAS# delay (tRCD) 11
RAS# Precharge (tRP) 11
Cycle Time (tRAS) 28
Command Rate (CR) 1T
MCHBAR I/O Base address 0x0FED10000
MCHBAR I/O Size 19456
MCHBAR registers

 

[neieus]

It's represented as CL and is normally the first number listed. The number will go up the higher the memory is running.

 

[Estix]

This is the CPU-Z report abot my RAM.. can anyone tell me whats my CAS Latency?
...snipped...
CAS# latency (CL) 11.0
...

Your CAS Latency is 11, are you asking what that means?

 

[Tradesman1]

What you see in the SPD tab is the various setttings programmed into the SPD, Look in the Memory tab to see what you are actually running at, The stick is a Nanya 1600/11 stick (4GB)

 

[Prdp]

This is the CPU-Z report abot my RAM.. can anyone tell me whats my CAS Latency?
...snipped...
CAS# latency (CL) 11.0
...

Your CAS Latency is 11, are you asking what that means?

You answered my question..
If i add a new RAM which has CAS latency 9 then will it work in dual channel??
or
I should go for Ram which has CAS Latency 11??