What should I do

[sir_tiger]

I have 2 Seagate Barracuda 7200.10 (Perpendicular Recording) ST3320620A 320GB 7200 RPM 16MB Cache IDE Ultra ATA100 Hard Drives and want to set them in RAID 0
I followed the procedure in Bios according the manual instructions, but I see that I must select Sata drives but I have
UATA Drives! What should I do?

Here are my specs!
#CPU: Intel Core 2 Duo E6600, 2.4GHz,
#Motherboard: P5W DH Deluxe Wi-Fi
#GPU: EVGA GeForce 8800GTS 320MB
#Main memory:CorsairXMS 2 Dominator 2 x 1GB DDR2 800MHZ
#Hard Drive: 320 GB + 320GB Seagate Barracuda 7200.10 rpm
#MONITOR: ViewSonic X Series VX922 19" 2ms
#CASE: COOLER MASTER Stacker 830
#PSU: Antec NeoPower NeoHE 550w
#Cooler: ARCTIC COOLING Freezer 7 Pro 92mm CPU Cooler

Best Regards
Sir_Tiger

 

[g-paw]

Make that ATA is setup to be recognized in the BIOS.