WHAT SHOULD I HAVE WITHIN MY SERIAL BUS CONTROLLERS

[stonepicker]

I still have a USB driver problem as listed in this forum, (DRIVER PROBLEM ? any help please)

In my universal serial bus controllers section within my medion akoya computer windows 7 64bit - I find several items duplicated for example
standard enhanced pci to usb host controller.....x 2
standard open hcd usb host controller .....x 5
usb root hub.......x 7


PS may I appologise for posting this in capitals, just a simple error didnt mean to disregard toms rules ...sory

 

[stonepicker]

I could follow you as far as the imgur site with it shown and could see the BBCode box which I ticked but dont know from there
ie what must I do exactly


How will I get a cut from the site to paste
I take it you mean right click on this box after I have managed a cut

 

[stonepicker]

Your email

I got save from the site but just the above ..which states your email... when tried to paste.. an error so now
need to know how to cut and paste the site correctly
thanks

 

[WR2]

Did you see your image uploaded?

Then use BBCode option off to the right.

That will let you paste the right code into your topic.

 

[WR2]

 

[stonepicker]

http://i.imgur.com/4Rdk8.jpg

I showed all of screen set out similar to the one you first showed, I presed the save and it stated saved ..corrected enter copy instead of save
looked to right but couldnt find any option nor could I give any entry or alternation to the box adjacent to BBCode
I am missing something sory for this trouble

 

[WR2]

Did you click the spot where my cursor arrow was in the picture above?

 

[stonepicker]

Did you click the spot where my cursor arrow was in the picture above?

Yes have done so several times dont know what hapens next

Didnt set any address or anything like that - there didnt seem to be a way to do so

 

[WR2]

Paste it into the post.
Right mouse click and paste

 

[stonepicker]

 

[WR2]

What you are seeing there is Disk 0 = 1 physical hard disk with four partitions.
Your 1TB HDD = Disk 0 = 900GB for your primary boot drive C: 30GB for your Recovery drive D:
You also have a 100MB OEM partition and a 1GB partition.
Plus the DVD/CD drive - currently empty.
-> Nothing on Disk 0 has anything what so ever to do with USB drives.
What you are seeing in the top window is all about the hard disk.

Now - next to the Disk0, over on the right, you can see a window slider that says where is part of the window not seen, under the CD/DVD drive. Move the slider and uncover the rest of the window. Plug one or your USB sticks in and see if you can find it in that lower window. For example here you can see 4 USB drives and the DVD drive with a disk in it:

 

[stonepicker]

What you are seeing there is Disk 0 = 1 physical hard disk with four partitions.
Your 1TB HDD = Disk 0 = 900GB for your primary boot drive C: 30GB for your Recovery drive D:
You also have a 100MB OEM partition and a 1GB partition.
Plus the DVD/CD drive - currently empty.
-> Nothing on Disk 0 has anything what so ever to do with USB drives.
What you are seeing in the top window is all about the hard disk.

Now - next to the Disk0, over on the right, you can see a window slider that says where is part of the window not seen, under the CD/DVD drive. Move the slider and uncover the rest of the window. Plug one or your USB sticks in and see if you can find it in that lower window. For example here you can see 4 USB drives and the DVD drive with a disk in it:
http://i.imgur.com/kosgi.png

I entered a memory stick and it showed up between the two lower placements.
I opened up the slider but nothing further to view
I am currently running my computer with thesignature enforcement disabled so that I can look at memory sticks which can be opened in this mode

I can see the stick entered correctly like yours below 0
it is disk 1 with its name correctly entered

 

[WR2]

signature enforcement disabled

 

[WR2]

did you know about that option all along?

 

[stonepicker]

No I discovered it tonight when I found the code listing when I was brave enough to look harder at all of the components within the field.
When I re start my computer I expect the error to return, but tonight I have mooved all stick info onto one big device.
It still seeems to be a driver signature error 52 do you have any guidence on how I can cure this without a download which provids the F8 configuration

 

[WR2]

I've never seen a #52 on an motherboard's USB deviced before.

Get an ID (make and model) of the motherboard you have installed.
Use CPU-z and find the info on the Mainboard Tab.
http://www.cpuid.com/softwares/cpu-z.html
Manufacturer / Model / Chipset
BIOS Brand / Version / Date

 

[WR2]

Also get a screenshot of the USB driver details.

 

[stonepicker]

I've never seen a #52 on an motherboard's USB deviced before.

Get an ID (make and model) of the motherboard you have installed.
Use CPU-z and find the info on the Mainboard Tab.
http://www.cpuid.com/softwares/cpu-z.html
Manufacturer / Model / Chipset
BIOS Brand / Version / Date

http://www.cpuid.com/medias/images/en/softwares-cpuz-03.jpg

Do you want me to download and scan etc as the site seems to offer, or do I download and actually look for details of the motherboard, assuming I can find it easily. (Will the details be in my medion booklet or accessable from my computer itself without the need of a download)

 

[stonepicker]

As I suspected after re booting the computer normaly the fault just returned.
I may have to follow this thru tomorrow it been a long day

 

[WR2]

For the moment do nothing but capture data and report when able.

 

[stonepicker]

may not have sent last one correctly will repeat

I downloaded from the site recommended
ran the download
although it stated it was a free site, it requested payment to fix reported errors
didnt find anything to report regarding the motherboard etc so obviously I am not on the correct track - will need further guidence

 

[WR2]

I downloaded from the site recommended
ran the download although it stated it was a free site, it requested payment to fix reported errors

Sorry, have no idea what you just said there.

 

[stonepicker]

IOt was where we lest off yesterday and the information you indicated would be of help.
Mainly the web site you recommended, I think there must be an error in the details or how I understood/implimented them

Ref the website, I used the top information which is about speeding up your computer, I couldnt figure any other download on the site and I need further help to get it sorted

 

[WR2]

ran the download - what download?
reported errors - what errors?

 

[stonepicker]

Ref the site you gave yesterday evening to gain information relating to motherboard etc.
I pressed on your link and I got to that site.
At the top it offers a download.
I figured that was what you requireed me to get in order to provide the details required.
I downloaded, and RAN the download and was offered a fix pack for a payment of around £19 or so. At this stage I thaught I had something wrong since the download was all about speeding up the computer etc.
Hence I didnt make progress as anticipated.
If you re visit site you will easily see how this misunderstanding has come about etc

 

[WR2]

CPU-z is free and available on that link.

You downloaded and ran something else if it asked for £19.
What did you run? What did it say on the program window?
What errors did it report?