what the best cable for seasonic M12II EVO 620 and m12II 850 bronze

[am73486]

i have both seasonic M12II EVO 620 and m12II 850 bronze

so i need this cable only 8 pin to dual 6+2 pin need 3 of them at least so after search i find this company sell them

what the best of them

https://www.newegg.com/global/sv/Product/Product.aspx?Item=N82E16812493220&cm_re=seasonic-_-12-493-220-_-Product



https://cablemod.com/products/?filter_series=se-series



https://www.moddiy.com/products/Seasonic-X-Series-GPU-PCIe-Dual-6%252b2-Pin-Modular-Power-Supply-PSU-Single-Sleeved-Cables-%28Red%7B47%7DBlack%29.html



so what the best and and they work fine with my power supply

 

[n0ns3ns3]

best in what ?
there are many cheap spliters starting at 2-3$.
that's somewhere in the middle https://www.amazon.com/Phobya-Y-Cable-8-Pin-Sleeved-Black/dp/B00A5TA7NG/ref=sr_1_56
You can order custom sleeved cables and it will be much cheaper than cablemod.

I don't know what you going to run of those, but be aware that in computers, 8pin cables and connectors are usually used for up to ~150watts.
So the original PSU cables/connectors not necessarily were built/tested/designed/rated for much higher current. If you going to run over 300watts GPUs of each of those cables, you might have a problem.

 

[volkgren]

I bought my SeaSonic power supply on Newegg, left a semi-negative review about the PCIe cables; and SeaSonic reached out and offered to send me extra cables.

I would try contacting them about needing cables. If they can't send them to you, you can at least ask about aftermarket cables like the ones you linked. Cables must be configured with the same pin layouts for specific power supplies.

 

[am73486]

i will run rx 560 with them . in mining rig

 

[am73486]

best in what ?
there are many cheap spliters starting at 2-3$.
that's somewhere in the middle https://www.amazon.com/Phobya-Y-Cable-8-Pin-Sleeved-Black/dp/B00A5TA7NG/ref=sr_1_56
You can order custom sleeved cables and it will be much cheaper than cablemod.

I don't know what you going to run of those, but be aware that in computers, 8pin cables and connectors are usually used for up to ~150watts.
So the original PSU cables/connectors not necessarily were built/tested/designed/rated for much higher current. If you going to run over 300watts GPUs of each of those cables, you might have a problem.

this link male to female i need male to male cable i will run gpus on them rx 560

 

[n0ns3ns3]

What I linked is extension/splitter cable that connects to existing cable. Since you are mining, you don't need sleeved cables as it has no function but cosmetics. So that's what i'd use for this purpose https://www.amazon.com/Quellera-Female-Graphics-Video-Double/dp/B078Z999L5/ref=sr_1_272

if i understand you correctly, you want to use 2x6pin from a 8pin ? you can easily run 4 of RX 560 on 620EVO and 6 on the 800w unit.

 

[am73486]

What I linked is extension/splitter cable that connects to existing cable. Since you are mining, you don't need sleeved cables as it has no function but cosmetics. So that's what i'd use for this purpose https://www.amazon.com/Quellera-Female-Graphics-Video-Double/dp/B078Z999L5/ref=sr_1_272

if i understand you correctly, you want to use 2x6pin from a 8pin ? you can easily run 4 of RX 560 on 620EVO and 6 on the 800w unit.

ok i understand you now but this cable will work in my seasonic

 

[n0ns3ns3]

this cable will work with any PSU that has 8pin cable for GPU (PCIe).