what to put my voltages to? fx4100 4.5hgz

[Ismaeel96]

hi, any one knows what to put my voltages to on a fx 4100 im ocing it to 4.5. i have it at 4.5 right now but set to auto voltages, and i got a bluescreen when playing a game (only one time at 1 game) i posted it and somone said its bcause of oc.

Specs:
250 gb barricuda HDD
4 GB RAM Patriot brand
AMD FX-4100 oc to 4.50 ghz
ati radeon hd 7850 XFX DD


bsod:
Additional information about the problem:

BCCode: 124

BCP1: 0000000000000000

BCP2: FFFFFA80049658F8

BCP3: 0000000000000000

BCP4: 0000000000000000

OS Version: 6_1_7601

Service Pack: 1_0

Product: 768_1

 

[TomTom111]

What are your voltages now?
Better to set voltages to manual to ensure stability.
Turn off power saving features for the CPU, and set your voltages then test it.
Every CPU chip is different, but i don't see the 4100 needing at, or more than 1.5v at 4.5GHz.

 

[Ace_Jambo]

There is an old method called 'Burn in' You could try setting it to say... 1.45v which should be more than enough and then work it down from there until its unstable again. try around 1.4v or even 1.38 for this particular CPU (this worked well for my 8320 at that speed. Had to nock it up to 1.45ish for 4.6Ghz).
Its hard to say for me because I use 'offset' voltage control and keep all power saving features enabled 😛

Note: Always watch and monitor your thermals.

 

[laviniuc]

you need the oc to make something playable? or just for kicks?

 

[Ismaeel96]

you need the oc to make something playable? or just for kicks?

lol it works fine without oc but i like to oc it cause if i dont i really wont have a use for my cooler 😛

 

[laviniuc]

so leave it stock freq, undervolt it instead it will spin slower and you get less noise. atleast that you notice.

 

[jonzoo]

what powersupply are you using?