GeneralMercer

Honorable
Nov 20, 2016
144
1
10,685
My system is almost 3 years old.Its having the same blue screen errors like "memory exception" or "kernel data inpage....."etc.My Motherboard has 2 slots having 8gb sticks each of ram each.Thought it was a Ram problem so I played on first slot two times(each with different stick),both times it crashed.Now I've put one of the two Ram sticks,only in 2nd slot and no error but game is lagging (horizonZeroD).Does that mean the first ram slot is faulty?I really hope it isn't as it was the same case in my previous setup(changed all parts for existing setup ofcourse)where both ram slots were faulty.What are the chances both times its the same problem(Ram slot)?To rule out other things I'm thinking of formatting but then I will have to install all drivers and pirated windows and check, and then again format and install a legit one.What to do???(are ram slots really that easy to falter?does it happen to everyone?)
 

Cem Goker

Distinguished
Jul 3, 2013
290
22
19,015
Alright, now see if you have the latest version of BIOS and if not, I highly recommend that you update it. Please do reset your BIOS settings to default before flashing the latest BIOS version to avoid complications later on. If that didn't work, you will need to download memtest86 and test each one stick with the 4 phase test. Do not put two of your RAM into the slots at the same time. If there is even a single error after the test is done, then you most likely have a faulty RAM, which will need replacement. It is kind of common to have faulty RAM slots on motherboards, but it usually happens throughout time and usage.
 

Yahya98

Distinguished
Mar 6, 2014
7
1
18,515
I recommend that you also check your hdd or ssd. I'm not an expert but I had the same problem with my laptop. The error (BSOD) always happen when my laptop is under stress usage of RAM, in my case it's when I'm editing large photo with photoshop.

I ran several kind of memtest, (memtest+, memtest86 etc), and it doesn't show any error (I also suggest you to run memtest first, like the post above this recommends). Then surprisingly the problem was caused by my faulty storage HDD (not the system one).

I was dumbfounded because in my logic it doesn't have anything to do with the system or RAM process, as it only serves as storage. But I found out that there's a Windows feature called Windows paging file which writes content into hard disk when main memory is near capacity.

So I ran a surface test to my faulty hdd and it has so much bad sector that the app predicts my hdd only last for 3 days left (its like 90% bad sector) . This was the problem that caused the kernel, memory error all this time on my laptop. But of course this is one extreme case, I just thought it might help to check on your hdd too to see if this was the case. Cheers.
 

GeneralMercer

Honorable
Nov 20, 2016
144
1
10,685
Alright, now see if you have the latest version of BIOS and if not, I highly recommend that you update it. Please do reset your BIOS settings to default before flashing the latest BIOS version to avoid complications later on. If that didn't work, you will need to download memtest86 and test each one stick with the 4 phase test. Do not put two of your RAM into the slots at the same time. If there is even a single error after the test is done, then you most likely have a faulty RAM, which will need replacement. It is kind of common to have faulty RAM slots on motherboards, but it usually happens throughout time and usage.
Have at least 150k bad sectors(hdd) and still counting.That's probably it right?
 

GeneralMercer

Honorable
Nov 20, 2016
144
1
10,685
I recommend that you also check your hdd or ssd. I'm not an expert but I had the same problem with my laptop. The error (BSOD) always happen when my laptop is under stress usage of RAM, in my case it's when I'm editing large photo with photoshop.

I ran several kind of memtest, (memtest+, memtest86 etc), and it doesn't show any error (I also suggest you to run memtest first, like the post above this recommends). Then surprisingly the problem was caused by my faulty storage HDD (not the system one).

I was dumbfounded because in my logic it doesn't have anything to do with the system or RAM process, as it only serves as storage. But I found out that there's a Windows feature called Windows paging file which writes content into hard disk when main memory is near capacity.

So I ran a surface test to my faulty hdd and it has so much bad sector that the app predicts my hdd only last for 3 days left (its like 90% bad sector) . This was the problem that caused the kernel, memory error all this time on my laptop. But of course this is one extreme case, I just thought it might help to check on your hdd too to see if this was the case. Cheers.
15 minutes in and hddscan has found 160k bad sectors and still counting, should I let it finish?(HDDScan)
 

GeneralMercer

Honorable
Nov 20, 2016
144
1
10,685
Used many ways to find and fix bad sectors.Read somewhere that chkdisk function identifies and makes bad sectors inaccessible(not sure if thats true).CHKdsk shows 12kb in bad sectors(in C drive), so are the bad sectors inaccessible or can they still be used?
In crystaldiskinfo "reported uncorrectable errors" is 1 and in victoria software "uncorrectable ECC errors" is 1 which I think are both the same.So are these sectors still working or should I use victoria software's "erase" option to remove all bad sectors?
(CrystalDiskInfo),(CMD CHKDSK of C drive) and (Victoria CHKDSK of c drive)
 

Colif

Win 11 Master
Moderator
You can't remove bad sectors. all you can do is work around them. Programs like chkdsk can mark them as bad so the operating system won't try to use them.

You don't want to use bad sectors as they can corrupt any info in them.

If you get too many, best answer is replace drive.

Uncorrectable sector count is still at max, so drive is probably fine now.

you could run this on a Seagate drive - https://www.seagate.com/au/en/support/downloads/seatools/

uncorrectable ECC errors does = Reported Uncorrectable errors

Recommendations

Although this parameter is not considered critical by the most hardware vendors, degradation of this parameter may indicate electromechanical problems of the disk. Regular backup is recommended. If no other (critical) parameters report a problem, hardware replacement is recommended on mission critical systems only.
https://kb.acronis.com/content/9122
Same advice goes for Hardware ECC recovered (C3)
https://kb.acronis.com/content/9131

you might want to back it up or maybe replace some of it with an ssd as boot drive - i would.
 

GeneralMercer

Honorable
Nov 20, 2016
144
1
10,685
You can't remove bad sectors. all you can do is work around them. Programs like chkdsk can mark them as bad so the operating system won't try to use them.

You don't want to use bad sectors as they can corrupt any info in them.

If you get too many, best answer is replace drive.

Uncorrectable sector count is still at max, so drive is probably fine now.

you could run this on a Seagate drive - https://www.seagate.com/au/en/support/downloads/seatools/
already used seatools and wasn't very useful.
So if I can't remove the bad sectors chkdsk marks them for not using.I have done chkdsk many times and it shows 12kb in bad sectors.Does that mean it has already marked them since it doesn't specifically say it has(that's what I'm worried about).
 

Colif

Win 11 Master
Moderator
which chkdsk command do you run?
chkdsk c: /f /r will fix and repair any system files it can.

It all depends. Bad sectors can be divied into physically and logically bad sectors.

It's likely to fix the latter case to use Windows disk check tools, such as error checking from disk properties window, chkdsk in cmd, or you can reformat the disk after complete data backup
link

Nothing can fix sectors, I feel it just tells the OS which ones to not use.

My hdd been on more hours but its power on count not even close to yours
6hZ5DSO.jpg

Guess difference is its not C drive.

When your computer notices a bad sector, it marks that sector as bad and ignores it in the future. The sector will be reallocated, so reads and writes to that sector will go elsewhere. This will show up as “Reallocated Sectors”


you reallocated sector count is still 100 so it doesn't appear its done that with them

I wouldn't worry about it too much unless the 12kb grows. Its not a massive percentage of a 1tb drive really.
 
Last edited:

GeneralMercer

Honorable
Nov 20, 2016
144
1
10,685
which chkdsk command do you run?
chkdsk c: /f /r will fix and repair any system files it can.


link

Nothing can fix sectors, I feel it just tells the OS which ones to not use.

My hdd been on more hours but its power on count not even close to yours
6hZ5DSO.jpg

Guess difference is its not C drive.
chkdsk c: /r was the one i used, though I think all the apps I've used must've done all thats possible(including chkdsk c: /f /r )
 

DSzymborski

Curmudgeon Pursuivant
Moderator
Yeah, that's a really high power on count.

Error.png


I don't think failure is imminent, but if you don't have backups -- and anyone who owns a PC needs backups at all times because it's a basic part of upkeep that comes with responsible ownership -- this would be a good excuse to start backing things up properly.

Hard drives die at some point between one minute and one century. If you have a good backup, then the loss of a hard drive cost nothing but the price of a replacement drive.
 

Colif

Win 11 Master
Moderator
The drive been powered on 9184 times in 10160 hours. That could be sign of a problem.
my hdd isn't boot, but shows 1109 times. My C drive only shows 2 more than that... 1111 times.

Power On Count is the number of times power to the drive has turned on. It could be machine reboots, it could also possibly be the hard drive turning off as a result of power save settings.
link
 

GeneralMercer

Honorable
Nov 20, 2016
144
1
10,685
Getting the Blue screen of death(sometimes 2-3 times a day or every 2-3 days)with errors like Unexpected store exception ,kernel data ,etc while gaming. Ran Memtest86 for 4 passes(as that was the default in latest version), both sticks passed so I'm assuming they are not the problem. Also I have 12 kb in bad sectors in hdd, ran chkdsk and heard that is supposed to make it inaccessible and it should be fine unless bad sectors grow. So what should I focus on now, HDD only or motherboard or cpu or gpu driver( latest installed) as I can't just buy a hdd and find out it wasn't the problem?
 

Colif

Win 11 Master
Moderator
unexpected store exception is a virtual memory error. The store in question is used by the CPU to track the location of files in virtual memory. The actual location of those files is either RAM or Page file

Kernal Data inpage error? thats an error that occurs on page file. Page file on C drive.

AFAIK those 12kb shouldn't be used, and as I said, they such a small percentage of the drives actual space that i be surprised if they are cause... but with those 2 errors, its possible. Could be the 12kb are right at start of drive.

That drive had a hard life, its been on/off over 9000 times in 10000 hours. Could be the cause.
 

Colif

Win 11 Master
Moderator
they already run chkdsk - https://forums.tomshardware.com/threads/bad-sectors-in-c-drive.3774627/#post-22776548

one thing you can try is recreate page file
  1. go to settings/system/about
  2. click advanced system settings
  3. under performance, click settings
  4. choose advanced tab
  5. under virtual memory, choose change...
  6. untick Automatically manage paging file size for all drives
  7. this will allow you to then choose No paging file and click set.
  8. click ok and apply.
  9. restart PC and retrace all those steps again until you reach Automatically manage paging file size for all drives which you should tick and ok again.
that recreates page file and might avoid errors.
 

GeneralMercer

Honorable
Nov 20, 2016
144
1
10,685
they already run chkdsk - https://forums.tomshardware.com/threads/bad-sectors-in-c-drive.3774627/#post-22776548

one thing you can try is recreate page file
  1. go to settings/system/about
  2. click advanced system settings
  3. under performance, click settings
  4. choose advanced tab
  5. under virtual memory, choose change...
  6. untick Automatically manage paging file size for all drives
  7. this will allow you to then choose No paging file and click set.
  8. click ok and apply.
  9. restart PC and retrace all those steps again until you reach Automatically manage paging file size for all drives which you should tick and ok again.
that recreates page file and might avoid errors.
The page file error was actually just once store exception is he one that is repeating(one crash corrupted save file of a game).Do you think I should format before buying new hdd?
 

Colif

Win 11 Master
Moderator
You could try a reinstall.

We can also try to identify if it is a driver
Can you follow option one on the following link - here - and then do this step below: Small memory dumps - Have Windows Create a Small Memory Dump (Minidump) on BSOD - that creates a file in c windows/minidump after the next BSOD

  1. Open Windows File Explore
  2. Navigate to C:\Windows\Minidump
  3. Copy the mini-dump files out onto your Desktop
  4. Do not use Winzip, use the built in facility in Windows
  5. Select those files on your Desktop, right click them and choose 'Send to' - Compressed (zipped) folder
  6. Upload the zip file to the Cloud (OneDrive, DropBox . . . etc.)
  7. Then post a link here to the zip file, so we can take a look for you . . .
depends how much of a rush you are, I need to set myself up to be able to convert those dumps.

if save files are getting corrupted, I feel its likely the drive at this stage
 

GeneralMercer

Honorable
Nov 20, 2016
144
1
10,685
unexpected store exception is a virtual memory error. The store in question is used by the CPU to track the location of files in virtual memory. The actual location of those files is either RAM or Page file

Kernal Data inpage error? thats an error that occurs on page file. Page file on C drive.

AFAIK those 12kb shouldn't be used, and as I said, they such a small percentage of the drives actual space that i be surprised if they are cause... but with those 2 errors, its possible. Could be the 12kb are right at start of drive.

That drive had a hard life, its been on/off over 9000 times in 10000 hours. Could be the cause.
Data inpage error was just once,store exception is the recurring one. I'm also thinking number of times I've booted my system(10k times) and hours used (10k hours) is the reason for hdd failure.Do you think formatting may help??