What's the flashing light bulb symbol, that also flashes my case logo?

[shadowxsap]

Hi, I'm using the Apevia x-telstar. This case is all about the flare, But this bit seems a bit inconsistent. Rarely do I ever see this light/logo illuminated, and now all of a sudden its on consistently and flashing. There's a symbol of a lightbulb right under my power button on my pc that lights up blue, and my logo at the top of the door on the case that reads "apevia" flashes in correspondence. What does this mean? Is it a bad thing? If its not consistently lit up could that be because of a failing psu? Any assistance in this matter is much appreciated.

For further clarification:
http://prntscr.com/942js2

 

[Someone Somewhere]

At a guess, you probably have it wired to your HDD light connector on the motherboard. It might be meant to be the power light; you could try swapping them over.

 

[shadowxsap]

At a guess, you probably have it wired to your HDD light connector on the motherboard. It might be meant to be the power light; you could try swapping them over.

I wish this were the case. the connector for this is actually on the mother-molex, the hdd light is above it.

 

[shadowxsap]

If it makes a difference it also varies on how bright the logo light gets, sometimes its very dim othertimes it lights up my room which also might be possible psu failing?

 

[Someone Somewhere]

Unlikely to be PSU failure; that would cause your rig to be wildly unstable.

Most likely, it's not plugged in fully.

 

[shadowxsap]

Unlikely to be PSU failure; that would cause your rig to be wildly unstable.

Most likely, it's not plugged in fully.

well in the least its comforting that the diagnosis is overall very minor compared to my imagination lol. I'll check the connection.

 

[shadowxsap]

The connection seems to be fine. 2 wire mother molex direct to psu.