What's the unstable component??

Alanthor

Reputable
Mar 17, 2014
417
0
4,810
Hey,

Im working on my OC, but Worker#4 always fails, in blend and the maximum heat thing test. The latest log report says
Code:
 FATAL ERROR: Resulting sum was 1.288887625060268e+097, expected: 1.288887625060269e+097
Hardware failure detected, consult stress.txt file.

Usually happends after like 5 minutes. It also says ILLEGAL sumout, possible hardware failure.

Im thinking.. Maybe it could be my RAM? I have never touched the RAM settings, except the MHz, but now it's auto (1333MHz). I havent touched the CPU FSB either, only multipler

My VCORE are 1.428, and the VDDA is 2.544. Bus speed - 200mhz, multiplyer is x23. Under DIGI+ settings, everything are according to http://www.overclock.net/t/1348623/amd-bulldozer-and-piledriver-overclocking-guide-asus-motherboard DIGI+ Power Control & CPU Configuration ONLY

So, about the RAM. Both are the same model, Corsair Vengeance 1600MHz 2GB. I have two of them, in slot#2 and #4. The part number is the same... BUT... Look here, the timings arent even matching :S
2qb68mq.jpg

r89hdz.jpg


So... Could it be the RAM's? Should I change the timings manual? Advice plz.
AMD FX-4300
Sabertooth 990FX R2.0

No temp issues
 

Alanthor

Reputable
Mar 17, 2014
417
0
4,810
The Prime95 errors? Yea, I know that. And im figuring on what component that could be unstable.. It can't litteraly be the CPU... Like, my VCORE is 1.428, and it's fixed. No Vdroop/Vdrop/Voltage drops