when I boot into windows 10 with my Gtx 760 it black screens

[goku the computer builder]

So as the title says when i plug my gtx 760 in and try boot the splash screen shows then the windows loading then it goes black. normally if i move my mouse the curser shows up and the windows load but now its not. I know it not the graphics card as i took it out and put into a Friends system it works
specs:
Pentium G3258
asus H87M-E
Gigabtye Gtx 760 Windforce 2GB rev 1a
edit 1
I've already tried this
Try these steps:
1. Turn off the computer and unplug
2. Remove Graphic card
3. Plug the monitor to your video output
4. Turn on the computer
5. Click on start and type msconfig
6. Select the Boot tab and click on the box that says Safe boot with minimal selected.
7. Apply then click ok.
8. DO NOT RESTART.
9. Shut Down computer and unplug
10. Install Graphic card
11. Turn on the computer (should boot into safe mode)
12. Go into Device Manager
13. Expand Display Adapter
14. Disable the Intel(R) HD Graphics 4000 driver. (DO NOT UNINSTALL)
15. Click the start button and type msconfig
16. Unclick Safe boot
17. Restart

 

[megamanx00]

Could be an issue with your mother board and that particular graphics card. It happens. What kind of PSU do you have?

 

[goku the computer builder]

Could be an issue with your mother board and that particular graphics card. It happens. What kind of PSU do you have?

corsiar cx 500.

 

[megamanx00]

Well the good thing is that it's got a single rail. You could try using molex to PCI-E adapters. Most likely though I suspect that your motherboard just doesn't like that video card. I had that happen with a friends computer where I put in this 6850 that used two pci-e connectors and even though it worked fine in every other computer his motherboard just wasn't having it. Then he got a 7850 and was fine.