Where do I connect case audio cables?

[Arthas Chill]

Here are the cables.

And here's the motherboard.

My motherboard only came with quick start guide back in the day so I don't have a manual.

 

[PCGrandWizard]

Have your tried the pins in the top right corner?

 

[backoffmanImascientist]

What model is that?

 

[Wolfshadw]

Amazing what you can find online these days.

-Wolf sends

 

[PCGrandWizard]

as well have you tried the pins underneath the PCIE slots at the bottom

 

[Arthas Chill]

What model is that?

An old 760GM-E51 (Non FX).

 

[Arthas Chill]

Does it matter in what order I connect them?

I connected them to Jaud1 and all I heard when I plugged my phone's earphones was that buzzing, electricity sound.

 

[Arthas Chill]

I found this in the manual.

So how do I do this, which cable goes where?

 

[Wolfshadw]

How do you have the connected currently so that you're getting nothing but an electrical buzz through the head set?

That diagram's about as useful as, well, you know.
What I would GUESS would be the following, but again, how do you currently have it connected?

GND - Pin Out #2
Mic IN - Pinout Either 1 or 3
Mic BIAS - Pinout #6
Spkout L - Pinout #s 9/10
Spkout R - Pinout #s 5/7

-Wolf sends

 

[Arthas Chill]

How do you have the connected currently so that you're getting nothing but an electrical buzz through the head set?

That diagram's about as useful as, well, you know.
What I would GUESS would be the following, but again, how do you currently have it connected?

GND - Pin Out #2
Mic IN - Pinout Either 1 or 3
Mic BIAS - Pinout #6
Spkout L - Pinout #s 9/10
Spkout R - Pinout #s 5/7

-Wolf sends

I tried doing what that picture said before.
Do I need to restart my PC for it to take effect? Since i'm doing this while it's running.

And I have two GND cables, I just don't use the second one?

 

[Wolfshadw]

NEVER work inside your computer while it's running. You'll be lucky if you didn't just fry the motherboard.

-Wolf sends

 

[Arthas Chill]

NEVER work inside your computer while it's running. You'll be lucky if you didn't just fry the motherboard.

-Wolf sends

Got it working, I was confused of how do I put them in. I didn't know that you should put audio sideways. Thanks.

And well, everything's anti-static, the place where the PC is put on and my hands with a band. And the voltage on audio pins are just too too low to cause any trouble if anything goes wrong.

 

[Wolfshadw]

Glad you got it working. But you still should never work on your computer while it's still running.

-Wolf sends