Where does the power led, reset sw, hdd led power sw go on a Gigabyte GA-Z87X-UD3H Motherboard?

[Walt1227]

Can someone please help me with this? I have wired my computer, but need to know where I put these small cables. They are the smallest cables in the case and I have no connections for them. All my case fans, hhd, ssd are hooked up to the power supply. I didn't have the 4 pin connectors to run the fans off the mobo.

 

[JackNaylorPE]

I dont have a copy of your MoBo manual....there are instructions with pictured inside

 

[dreamerz]

http://download.gigabyte.us/FileList/Manual/mb_manual_ga-z87x-ud3h_e.pdf page 29 on manual. Its on the bottom right says F_Panel. Its fine connecting the case fans to psu it'll just run full speed or you can buy a fan controller. You should be fine connecting the fans to the MB too if you want I think it just wont be adjustable either.

 

[Walt1227]

I found it. Now the problem I am having is getting the computer to start. I plugged it in and flipped the switch the motherboard power light is orange and the graphics card light is green. The issue is when I hit the power button to turn on the computer it clicks one time and one LED fan blinks once then I get nothing else. I flipped the switch back off and then on again and it does the same thing. Anybody have a clue as to what may cause this? IMO it seems like it is trying to start, but something is holding it back. It reminds me of a dead car battery when the key is turn and you get one click and then nothing.

 

[FinnZilla]

check to see your motherboard cables are all in tightly, sometimes they are hard to get in, its the big 24 pin

 

[JackNaylorPE]

I think he figured it out by now since the problem is now almost 2 years old

 

[Negativelead]

I think he figured it out by now since the problem is now almost 2 years old

Lol