where is good CASE with recommended POWERSUPPLY?

[winglesslight]

Hi,
I searched the Internet over 10 hours and can't find a good case(must have good airflow) which has a recommended power supply
Does anyone knows where to get it?
If not, anyone recommend good case without powersupply and wehre to get it?
Thank you very much.

 

[Porkloin]

Addtronics Cases with Enermax Powersupplies. There's a few outfits that sell them combined, but damned if I can remember who. You may have to buy them separately and put them together yourself.
http://www.addtronics.com/
http://www.thetechzone.com/reviews/powersupply/enermax450/index.shtml
Supermicro markets an Addtronics case (7890) as their 760 if you have a Dealer in your area that sells them, but they generally cost a little more.

 

[Porkloin]

I found a place that puts the two together: http://www.coolcases.com/

 

[Tankman]

After many hours of research on the net, I ordered an Avance 7004 with a Sparkle PS (AMD approved) at www.phamcomputer.com. I couldn't find a better case for the money. I found a review of it at http://www.mikhailtech.com/articles/avance7004.shtml. Good hunting.

 

[ejsmith2]

If you have the proper tools, you can modify any full-tower case to meet your needs. The quality of tools determines how long you will have to grind/cut on the case, with the fastest going to the member of every good farmer's toolcase: the acetylene torch.

Close matches are a dremel, drill press, rotozip, jigsaw, sawzall, and a 12-gauge.

Don't pay over $73 for a full tower case + 300watt power supply, unless the power supply is outstanding.

Check <A HREF="http://www.pricewatch.com" target="_new"> Pricewatch </A>, under 'full tower cases'.

 

[Guest]

You may want to check out the Antec SX830 or the SX1030. Both are solid cases w/ multiple fan slots open. They ship with a Antec PP303X, but you can exchange that for an Enermax or Sparkle.