Which D9's are best, 2nd best so on and so fourth

[little_scrapper]

Now that I have what looks like a very comprehensive list of IC chips used on various models of memory HERE: http://ramlist.ath.cx/ddr2/

THE EXAMPLES BELOW ARE JUST THAT, EXAMPLES. I am just gathering info, not making any recommendations.

D9 Fatbodies:
D9DQT = BT-3 the good stuff but no longer manufactured
D9DQW = BT-37E the good stuff (rumered better than DQT?)

I hear these next 2, the D9GMH and D9GKX are the new ones to be looking for
D9GMH = B6-3
Team Xtreem PC5300 TXDD1024M667HC3DC OC: 363.9MHz @ 3-3-3-4, autoV, Intel 975X
Team Xtreem PC5300 TXDD1024M667HC3DC OC: +500MHz @ 4-?-?-?, autoV, Intel 975X
Corsair PC8500 XMS2 TWINX 8500 OC: 601.9MHz @ 4-4-3-5 2T, ?V, AM2 Asus M2N32-SLI Deluxe
Crucial PC6400 Ballistix OC: 418.5MHz @ 3-3-3-12, 2.5V, i975Xa
Patriot PC2-8000 2GB Kit Rated 5-5-5 Model no. PDC22G8000ELK
A-DATA Vitesta Extreme Edition PC2-6400 CL4-4-4-15 2x1024MB
GEIL DDR2 ULTRA 1024/2X1024-6400 800@4-4-4-12 2.4V HS=Racing Orange

D9GKX = B6-25E
Buffalo PC8000 FireStix OC: 462.5MHz @ 3-4-4-10, 2.0V, NF4 SLI Intel Ed
Buffalo PC8000 FireStix OC: 510.0MHz @ 5-5-5-10, 2.0V, NF4 SLI Intel Ed
Super-Talent PC6400 Over-clocked T800UX2GC4 OC: 470.9MHz @ 4-4-3-8, 1.8V, Intel 975XBX
Super-Talent PC6400 Over-clocked T800UX2GC4 OC: 500.7MHz @ 4-4-3-8, 2.1V, Intel 975XBX
Super-Talent PC6400 Over-clocked T800UX2GC4 OC: 524.8MHz @ 4-4-3-8, 2.3V, Intel 955X
Super-Talent PC6400 Over-clocked T800UX2GC4 OC: 555.0MHz @ 5-5-5-?, 2.3V, Intel 955X
Super-Talent PC6400 Over-clocked T800UX2GC4 OC: 482.0MHz @ 4-3-4-8, 2.1V, nForce4 SLI Intel Edition
Super-Talent PC6400 Over-clocked T800UX2GC4 OC: 510.0MHz @ 5-5-5-12, 2.1V, nForce4 SLI Intel Edition
OCZ PC8000 EL Platinum Extreme XTC OC: 380.5MHz @ 3-3-3-9, 2.2V, Intel 955X
OCZ PC8000 EL Platinum Extreme XTC OC: 513.0MHz @ 4-4-4-12, 2.2V, Intel 955X
OCZ PC8000 EL Platinum Extreme XTC OC: 525.0MHz @ 5-5-5-15, 2.2V, Intel 955X
OCZ Platinum 2GB DDR2 1000 5-5-5-15 OCZ2P10002GK
Micron DDR2 D9-GKX 800mhz 2x512MB

D9GCT = B6-37E = ssame as D9GMH different binning
SUPER TALENT 2GB DDR2 800 T800UX2GC4 4-4-3-8 2.2V


D9DCN = CB-37E
D9DCL = CB-3
EDIT: just putting this up as I find them, not in order yet

also correct me if Im wrong on stuff will change

 

[rwaritsdario]

Where will this ones go!?

hehe 8)

 

[3lfk1ng]

Or these ones

hehe 8)

 

[little_scrapper]

What are you guys doing? Rip them damn spreader off and then take the picture!!! DUHH!! hehe

 

[rwaritsdario]

How you liking this JetRam chips!?

hehe 8)

 

[little_scrapper]

EDIT: OK I dropped this list as the link I have above is working now. I have also saved a copy of that list in case the link goes down again. If it does and someone needs to look at it PM me and Ill put up or email you a copy.

 

[rwaritsdario]

That list is actually very outdated, it doesnt even have the new 10x10mm 80nm included!

 

[little_scrapper]

That list is actually very outdated, it doesnt even have the new 10x10mm 80nm included!

Nobody can afford those anyways.

 

[rwaritsdario]

Those are the ones the whole DDR2 market is on right now.

 

[3lfk1ng]

Or this D9 ram

hehe 8)

 

[wiz83]

LMAO @ D9 RAM

 

[dasickninja]

Or this D9 ram

hehe 8)

What the hell...

 

[Guest]

mehhhhhhh!

Super leet thread!

I am now Eyeballing these since I missed the Crucial =(((

Ballistix C3
Buffalo FireStix

I am reading a few reviews and waiting for Dario approval =), then that's it I am getting my ram today, sick of waiting! and getting screwed!

Edit: Can't really see why the Bufalo has Cas5, under rated?Also the newegg review are not stellar for the Crucial, I blame the users. And Buffalo can be had 50cents cheaper on chiefvalue and Crucial a good 5$ =)

 

[little_scrapper]

Dont put much faith in most newegg reviews. Most people that complained about their ram being DOA took 3 weeks to figure out that they needed to turn the mem voltage up from 1.8v to 1.9-2.0v. I would have to say when it come to computers, 75% of all newegg reviewers, couldnt find their own A**hole with both hands and a funnel. I mean how many DELL owners complained cause their ram wasnt detected right...snickers* heh

 

[little_scrapper]

What would you guys think about buying a pair of these?:

http://www.newegg.com/Product/Product.asp?Item=N82E16820161662

They run 4-4-4-10 @ 1.8V

lifetime warranty

would cost under $220 for a pair

 

[Guest]

There are various steppings that yield various overclocking results. They all can run low latencies but they scale differently when it comes to high frequencies. So far I have encountered three different D9 steppings--D9CRZ, D9DQW, and D9DQT. D9CRZ is the lowest scaling fatbody D9 and reaches around 850MHz-900MHz. D9DQW comes in second and reaches around 900MHz-1000MHz. D9DQT is the best and overclocks the highest, easily breaking the 1GHz barrier.

These are DQW, older fat body...
I think the Firestix would be better!

 

[little_scrapper]

you think the firestix are DQW or the Wintec?