Which motherboards support 2x4GB RAM ?

[eyuu]

I have 2x4GB Kingston HyperX Blu DDR2 800MHz .But my motherboard does not support the ram.
Do u know which motherboards support ? ( my motherboard is Asus P5QPL-AM with only two ram slots)

 

[Aspire77360]

The motherboard should support them. What makes you think it doesn't?

 

[Tradesman1]

What actual set of DRAM? model#

 

[eyuu]

What actual set of DRAM? model#

The details are avaible in this site. The ram in picture is my ram.

http://

 

[eyuu]

When i started the pc with one 4GB ram.I looked at ram information.It seems only 2GB.
In bios 4gb ram is 2gb.(2048).I updated bios.But it didnt work.What can i do ?
Secondly, When i start the pc with two 4GB ram. Pc is freezing on the screen of " Windows is starting". And wait wait wait. Not started.

 

[Tradesman1]

They should be fine, do you have the latest BIOS, have you tried the sticks individually to make sure not a bad stick

 

[eyuu]

Reply to Tradesman1

Yes i updated latest bios from support.asus.com.But didnt work. I tried the sticks individually. The stick work already with my other 2GB DDR 800 MHz kingston ram.

 

[Tradesman1]

Does an individual stick work by itself? If so go into the BIOS and raise the NB voltage + 0.10, then try adding the second stick

 

[eyuu]

Does an individual stick work by itself? If so go into the BIOS and raise the NB voltage + 0.10, then try adding the second stick

Normally, ram voltage is 1.8.I raised the voltage to 2.0V.And its same.Didnt work.

 

[jaimelmiel]

According to the specs Newegg has listed for your board it should work with 8GB or 2 / 4GB dimm's.

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131394

 

[Tradesman1]

Raise the NB voltage, that's where the MC (memory controller) gets fed

 

[eyuu]

According to the specs Newegg has listed for your board it should work with 8GB or 2 / 4GB dimm's.

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131394

According to Asus offical web site The mobo supports max. 8GB. But i tried it doesnt work.

http://