[SOLVED] Which Ports to use for a H60 CPU Cooler?

Sep 13, 2020
1
0
10
0
I recently bought a Corsair H60 CPU cooler. In the manual it says to "Connect pump tach cable to the CPU_FAN header " Ive got an Msi Z390 - A Pro. On my mother board the headers i have are CPU_Fan 1, Pump fan 1 and then the system Fans.

Im wondering which header i should have it plugged into? Right now ive got it plugged into the Pump fan 1. and when i got into hardware monitor it say that the PUMP fan 1 is running in the 4000 RPM range.
any help is really appreciated
 

Aeacus

Glorious
Ambassador
AIOs are usually plugged into CPU_FAN header. The PUMP_FAN header is usually for open-loop water coolers that have dedicated pump. Also, 4000 RPM is right since that's about how fast AIO pumps run.
 

Aeacus

Glorious
Ambassador
AIOs are usually plugged into CPU_FAN header. The PUMP_FAN header is usually for open-loop water coolers that have dedicated pump. Also, 4000 RPM is right since that's about how fast AIO pumps run.
 

ASK THE COMMUNITY