[SOLVED] Which UPS is good for my desktop computer (specs incl.)?

Sep 17, 2018
12
0
10
Hello!

What UPS do I have to use for this desktop computer?

Intel® Core™ i5-8500 CPU
Asus PRIME B360M-A MB
HyperX Fury Black 16GB 2666MHz DDR4 RAM
Western Digital Blue 1TB 7200RPM SATAIII HDD
Kingston SSDNow A400 Series 240GB SATA III SSD
Aerocool VX-650 650W 230V APFC PSU
LG 27MP68HM-P 27” LED FHD IPS Monitor
GPU 2GB to 4GB Future Upgrade

When the electricity is went off...
UPS Backup Usage: Saving my works, shutting down the computer properly.
UPS Backup Duration Usage: 1-2 minute(s).
UPS Connected Devices: LG 27MP68HM-P Monitor and Desktop Computer.

What's the best UPS VA/W to handle that computer? 1000VA, 1500VA or 2000VA

What UPS brand would you recommend? PCE, APC, Eaton, INVO or LeGrand?
 
Solution
A flat-panel monitor uses next to nothing compared with the computer. My CCFL-backlit panel uses 45W; a modern LED one is more like 25W. When I used to have my server in the same room as my main PC, I had both on the 1000VA UPS, with dual CCFL monitors, and could run for about 15 minutes.

(A decent-size CRT would have needed 150-200W (and perhaps 500W of surge capacity at power-on for degaussing) but thankfully that's history. In CRT days, I just relied on the UPS software automatically shutting down the PC at the limit of battery runtime, with a blind Ctrl-S when the mains went off to ensure my work was saved.)

molletts

Distinguished
Jun 16, 2009
475
4
19,165
1000VA should be plenty. You'll probably get an hour or more of light-usage runtime (less in a heavy gaming session, though) out of an APC Smart UPS 1000, judging by how long my home server (a power-hungry AMD-based system with multiple 15,000rpm hard drives) runs on one.

I trust APC and Eaton UPSes.
 
Sep 17, 2018
12
0
10
Thanks Molletts for replying to me. Just to remind you a 27" LG LED/IPS Monitor will be connected to the UPS and again the running time would be 1-2 minute(s) to save my work and shut down the computer properly only nothing else will be done on the backup UPS. Is a 1000VA UPS enough to handle up the computer specs with a monitor and power supply of the computer too? 2-4GB VGA will be installed later.


 

molletts

Distinguished
Jun 16, 2009
475
4
19,165
A flat-panel monitor uses next to nothing compared with the computer. My CCFL-backlit panel uses 45W; a modern LED one is more like 25W. When I used to have my server in the same room as my main PC, I had both on the 1000VA UPS, with dual CCFL monitors, and could run for about 15 minutes.

(A decent-size CRT would have needed 150-200W (and perhaps 500W of surge capacity at power-on for degaussing) but thankfully that's history. In CRT days, I just relied on the UPS software automatically shutting down the PC at the limit of battery runtime, with a blind Ctrl-S when the mains went off to ensure my work was saved.)
 
Solution