Which way do I press the pin?

[waynelugames]

https://imgur.com/a/fxqhNFV

Based on the image which direction am I suppose to press on my A320m Pro-VH MB? I’m trying to press the lever down however it won’t budge. What am I doing wrong?

 

[Dunlop0078]

To remove the GPU you press it down. To put in the GPU you just push the GPU down into the slot until you hear it click. If the GPU is not fully seated you wont be able to push down that tab.

 

[waynelugames]

To remove the GPU you press it down. To put in the GPU you just push the GPU down into the slot until you hear it click. If the GPU is not fully seated you wont be able to push down that tab.

The GPU seems to be correctly fit, however the tab won’t push down. How easily is it suppose to push down?

 

[Dunlop0078]

To remove the GPU you press it down. To put in the GPU you just push the GPU down into the slot until you hear it click. If the GPU is not fully seated you wont be able to push down that tab.

The GPU seems to be correctly fit, however the tab won’t push down. How easily is it suppose to push down?

A bit of force, you have to lift the heavy GPU out of it's slot a bit with just that tab. But not an excessive amount to the point were you feel like you're going to break the tab off. Give the GPU a light wiggle and maybe pull on it lightly as you push in the tab.

 

[waynelugames]

To remove the GPU you press it down. To put in the GPU you just push the GPU down into the slot until you hear it click. If the GPU is not fully seated you wont be able to push down that tab.

The GPU seems to be correctly fit, however the tab won’t push down. How easily is it suppose to push down?

A bit of force, you have to lift the heavy GPU out of it's slot a bit with just that tab. But not an excessive amount to the point were you feel like you're going to break the tab off. Give the GPU a light wiggle and maybe pull on it lightly as you push in the tab.

I pushed it down as far as it could before bending the MB and the GPU just won’t release. After I wiggle it for a bit and pull on the GPU after pushing down the tab I stand the computer back up and push the GPU back into place and I hear a click.

I am assuming I did it right due to the GPU locking back in, but it won’t detach from the MB.

 

[Kasper Jorgensen]

Did you remove the small screw that is fixing the GPU to the case?