[SOLVED] Why Am I Getting BSODs during stress tests?

[techflame700]

Whenever I run AIDA 64 or Prime95 V 26.6 I encounter a BSOD. Sometimes it occurs immediately after starting the test or up to 15 minutes after the start. I don’t get a BSOD in any other program. My CPU is not overheating, my max temp is 69 C. I have checked my RAM for errors using the Windows memory error checker and MemTest86, none were found. After checking BlueScreenView it appears that the program causing the bad pool header is storport.sys and ntoskrnl.exe for the IRQL error. Thanks!

UPDATE: Forum Moved To: http://www.tomshardware.com/forum/id-3884038/bsods.html

 

[kerberos_20]

run metest86, if ull get no errors there, then id check your drivers

 

[techflame700]

run metest86, if ull get no errors there, then id check your drivers

I ran MemTest86 no errors were found.

 

[J_E_D_70]

What’s your vcore? Usually bsod under a test load is not enough vcore.

 

[techflame700]

What’s your vcore? Usually bsod under a test load is not enough vcore.

Stock voltage.

 

[J_E_D_70]

Need to know the actual vcore under load when the bsod happens. From there, you add additional vcore in small increments until stable.

Then again, do the bsods happen under normal operations? If not and you are not comfortable with fiddling with bios I’d just let it be.